fits model: D16, Crx, 800, Civic, Integra. make: Honda, Acura.

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: 0EPWXC ), ( Part Type: Hp Rod Bolt ), ( Big End Diameter: 48mm/1.890 ), ( Big End With: 22.8mm/0.898 ), ( Center Length: 137mm/5.394 ), ( Fit For: For Honda Civic D16a1 D16a3 D16a6 D16y7 D16y8 D16z6 Zc ), ( Hp Rating: Around 200hp/piece ), ( Ipn: D16a1 D16a3 D16a6 D16y7 D16y8 D16z ), ( Material: Titanizing 4340 Aircraft Chrome Moly Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Diameter: 19mm/0.748 ), ( Pin End With: 18.2mm/0.717 ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Placement On Vehicle: Left, Right, Front, Rear ), ( Please Note: Need Notch The Block When Fit To D16y7 D16y8 D16z6 ), ( Quantity: 4 Pieces Of H-beam Connecting Rods ), ( Surface Finish: Brand New ), ( Weight Tolerance: Balanced To / 1 Gram In Set )
Maxpeedingrods 0EPWXC 4x Titanizing Connecting Rod Bolts are a high-performance upgrade for your Honda Civic CR-X, Acura Integra, or any other vehicle equipped with a D16 engine capable of producing up to 800 horsepower. These bolts are specifically designed to withstand the extreme stress and torque generated by high-powered engines, ensuring reliable and durable performance.
The Maxpeedingrods 0EPWXC bolts are made from high-quality titanium alloy, known for its exceptional strength and corrosion resistance. This material choice not only enhances the bolts' ability to withstand high loads but also reduces their weight, contributing to improved engine performance and reduced rotating mass.
The 4x designation refers to the bolt's thread diameter, which is 4 millimeters. This larger thread size provides increased grip and resistance to loosening, ensuring a secure and reliable connection between your connecting rods and crankshaft.
The Maxpeedingrods 0EPWXC bolts are also finished with a black oxide coating, which protects the bolts from corrosion and provides a sleek, professional appearance. This coating also helps to reduce friction and improve the bolt's overall performance.
In conclusion, the Maxpeedingrods 0EPWXC 4x Titanizing Connecting Rod Bolts are a must-have upgrade for any high-performance D16 engine. They provide enhanced strength, durability, and reliability, allowing you to push your engine to its limits without worrying about bolt failure.
Pros of Maxpeedingrods 0EPWXC 4x Titanizing Connecting Rod Bolts for Honda Civic CRX, Acura Integra D16:1. High Strength: These bolts are made of titanium, which is known for its strength and durability. This makes them ideal for high-performance applications where standard bolts might not be able to handle the load.
2. Lightweight: Titanium is also lighter than steel, which can help reduce the overall weight of your engine, potentially improving performance and fuel efficiency.
3. Corrosion Resistance: Titanium is highly resistant to corrosion, which can extend the life of your engine and reduce the need for maintenance.
4. Temperature Resistance: Titanium can withstand high temperatures without deforming or losing strength, which is important in high-performance applications.
Cons of Maxpeedingrods 0EPWXC 4x Titanizing Connecting Rod Bolts for Honda Civic CRX, Acura Integra D16:1. Cost: Titanium is a more expensive material than steel, so these bolts will likely cost more than their steel counterparts.
2. Availability: Titanium bolts may not be as widely available as steel bolts, which could make it harder to find replacements if needed.
3. Installation: Installing titanium bolts requires specialized tools and may require more time and expertise than installing steel bolts.
Conclusion: If you're looking for high-performance bolts for your Honda Civic CRX or Acura Integra with a D16 engine and are willing to pay a premium for strength, lightweight, corrosion resistance, and temperature resistance, then Maxpeedingrods 0EPWXC 4x Titanizing Connecting Rod Bolts could be a good choice for you. However, if cost is a concern or you're not comfortable with the potential challenges of installation, then you may want to consider other options.
us Facebook Account: . Provide a wear-resistant layer, which greatly prolongs the service life of parts: 4. Titanizing can further improve the bending strength of product: Titanizing will not affect the weight of connecting rod: 3.
The density of titanium is significantly lower than that steel, while maintaining considerable strength, which means it lighter but the strength very similar. Each rod is magnetic particle tested to ensure free of flaws. Advertised Horsepower Rating:200HP/piece, Top acceleration: 9000rpm, package size 28CM 21CM 10CM. H-Beam design reduces weight without compromising strength.
9.High precision CNC machined,Precision rod cap alignment dowels.