SCAT 2-ICR60002000-1 Pro Single Beam Connecting Rod Bushed 846091052098 3/8 Arp 8740 Cap Screw

( Brand: Scat ), ( Manufacturer Part Number: 2-ICR60002000-1 ), ( Part Type: Rod Cap Screw ), ( Country Of Origin: Chn ), ( UPC: 846091052098 )

Review SCAT Chevy Pro Stock Single I beam Connecting Rod Bushed 3/8 Arp Cap Screw

The **SCAT 2-ICR60002000-1 Chevy Pro Single I-Beam Connecting Rod** is a meticulously engineered, high-performance component designed to elevate the durability and reliability of vintage and modern small-block Chevrolet engines, particularly those in classic muscle cars, street rods, and high-performance applications. Crafted from **forged 4340 steel**, this connecting rod embodies strength and precision, ensuring it can withstand the extreme stresses of high-revving engines while maintaining structural integrity under heavy loads. The **I-beam design** provides an optimal balance of stiffness and weight, reducing reciprocating mass without compromising rigidity, which translates to improved engine efficiency, smoother operation, and enhanced power delivery. This rod is specifically tailored for the **Chevy Pro Single** engine family, including popular variants like the 327, 350, and 454, making it a seamless fit for both stock and modified applications.

At the heart of this rod s performance is its **bushed construction**, featuring high-quality **bronze bushings** that offer superior wear resistance and lubrication retention, reducing friction and extending component life. The **3/8-inch ARP 8740 cap screw** is a standout feature, combining **high-strength, quenched-and-tempered steel** with a **fine-thread design** for maximum clamping force and bolt retention. The ARP 8740 is a premium choice for high-performance engines, known for its ability to handle extreme torque and prevent bolt stretch or failure under demanding conditions. The rod s **precision-machined surfaces** and **laser-peened critical areas** further enhance its fatigue resistance, ensuring it can endure the rigors of aggressive driving, drag racing, or daily high-mileage use without compromising performance.

Beyond its mechanical superiority, the SCAT 2-ICR60002000-1 rod is built with **race-proven engineering** in mind, incorporating features like **optimized pin offset** for balanced piston motion and **carefully balanced weight distribution** to minimize engine vibration. This attention to detail not only improves drivability but also contributes to longer bearing and journal life, reducing maintenance requirements and maximizing engine longevity. Whether installed in a **restored classic Chevy** seeking to reclaim its original power or a **highly modified small-block** pushing the limits of horsepower, this connecting rod delivers the reliability and performance needed to turn heads and dominate the track or street. Backed by SCAT s reputation for innovation and quality, this component is an essential upgrade for enthusiasts demanding nothing less than the best in engine-building excellence.

### **Pros and Cons of Buying SCAT 2-ICR60002000-1 Chevy Pro Single I-Beam Connecting Rod Bushings with 3/8" ARP 8740 Cap Screws**

1. **High-Quality Material** SCAT parts are known for using premium materials, including forged steel for the connecting rod and hardened steel for the bushings. This ensures durability and resistance to wear, especially under high-stress conditions.

2. **Precision Engineering** The I-beam design of the connecting rod provides superior strength and rigidity compared to traditional rods. This reduces the risk of bending or fatigue failure, which is critical in high-performance or heavy-duty applications.

3. **ARP 8740 Cap Screws** The inclusion of ARP 8740 cap screws is a significant upgrade. ARP bolts are known for their high tensile strength, corrosion resistance, and precision threading, which helps prevent bolt stretch and failure under extreme loads.

4. **Compatibility with Chevy Pro Series Engines** This part is specifically designed for Chevy Pro Series engines (e.g., LS-based or small-block applications), ensuring a proper fit without modifications. This reduces the risk of clearance issues or improper installation.

5. **Aftermarket Support and Reputation** SCAT is a well-respected brand in the performance and racing community. Their parts are widely used in high-performance builds, and they offer technical support for installation and troubleshooting.

6. **Reduced Maintenance Risks** High-quality bushings and bolts minimize the likelihood of premature wear or failure, which can lead to catastrophic engine damage if a rod snaps or a bolt shears.

7. **Potential for Increased Power** Upgraded rods and bushings can improve engine reliability when running higher horsepower or torque, allowing for more aggressive tuning without fear of component failure.

---

1. **Cost** This is a premium part, and the price reflects the quality. For budget-conscious builders, this may be more expensive than OEM or lower-tier aftermarket alternatives. A single rod and bushing set can cost significantly more than stock components.

2. **Installation Complexity** While not overly difficult, installing these rods requires careful attention to torque specifications, alignment, and proper lubrication. Improper installation could lead to premature wear or failure. Some builders may need to consult a professional mechanic.

3. **Limited Availability of Replacement Parts** If something goes wrong (e.g., a bushing wears out), finding exact replacements may be challenging compared to more common OEM parts. SCAT parts are specialized, so sourcing spares could be harder.

4. **Overkill for Mild Applications** If the engine is only used for light-duty or stock performance, these upgraded rods and bushings may not be necessary. For such applications, OEM or mid-range aftermarket parts could suffice without the added cost.

5. **Potential for Over-Torquing** The high strength of ARP bolts means they can handle more torque than stock bolts, but this also requires precise installation. Over-torquing could strip threads or damage the rod or crankshaft.

6. **Weight Consideration** While the I-beam design is strong, it may add slight weight to the rod assembly compared to lighter aftermarket options. This could have minimal impact on most applications but may be a consideration for extreme high-RPM or drag racing setups.

7. **Compatibility with Non-Stock Engines** While designed for Chevy Pro Series engines, modifications like forged pistons, custom crankshafts, or aggressive camshafts may require additional considerations (e.g., rod length, bearing clearances). Always verify compatibility with the specific engine build.

---

The **SCAT 2-ICR60002000-1 Chevy Pro Single I-Beam Connecting Rod with ARP 8740 Cap Screws** is an excellent choice for builders targeting **high-performance, reliability, and durability** in Chevy Pro Series engines. The I-beam design and ARP bolts significantly reduce the risk of catastrophic failure, making this an ideal upgrade for **racing, heavy-duty towing, or high-horsepower applications**. However, the cost and installation demands make it less suitable for **budget builds or mild street applications**.

If your engine is subjected to **extreme stress, high RPMs, or aggressive tuning**, this part is justified and highly recommended. For **stock or lightly modified engines**, a more cost-effective alternative (e.g., OEM rods with upgraded bolts) may be sufficient.

- You are building a **high-performance or racing engine** (e.g., LS-based, small-block Chevy with forced induction or nitrous).

- You prioritize **reliability and longevity** over cost savings.

- Your engine will run **high horsepower or torque** (e.g., 600 hp or 700 lb-ft).

- You have experience with **precision bolted assemblies** or are willing to consult a professional for installation.

- Your budget is limited, and you only need **mild performance upgrades**.

- Your engine is **stock or lightly modified** and won t see extreme loads.

- You prefer **lighter rods** (e.g., hollow or forged aftermarket rods) for high-RPM applications.

For most **serious performance builds**, this SCAT rod and bushing set is a **strong recommendation** due to its proven track record in demanding applications. Always pair it with proper installation procedures and maintenance to maximize its benefits.

Details:

American Express.

part #: 2icr600020001 prices

• $69.34-$498.84

specifications pistonrinro:

• for makes: Chevy
• brand: Scat
• mpn: 2-icr60002000-1
• part type: Rod Cap Screw
• country of origin: Chn
• upc: 846091052098

returns pistonrinro:

• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

seller pistonrinro:

• city: , Ohio
• rating: 99.3%
• # reviews: 623372

shipping pistonrinro:

• transit: 22-35 Days
• service: Standard
• type: Fixed
• class: Standard
• cost: $15.99

offer pistonrinro:

• quantity: 2
• options: Ship-to-home
• availability: In Stock
• started: March 31, 2026
• sold: 0

general pistonrinro:

• condition: New
• Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts

payments pistonrinro:

• wallet: Apple-pay
• credit card: Discover
• other

Scat 2-ICR60002000-1 Is Similar To:

• 10250-3 Scat Volkswagen Beetle Classic Vw H-beam Rod Set Stroker Bug Bus (28.7% similar) Includes spec sheet, torque setting and weights. Material 4340. Made in 2003 and shelved since. Number 3m Scat beam rod set pin diameter. Fits 1600CC case, AS41, type 1, bug, bus, Gaia, baa bug, rat rod, high performance. Here is a set of 4 new Scat beam connecting rods, made by Scat enterprises. ...(January 19th, 2016)
• 6540092720 Scat Pro Sport Connecting Rods Small Block Ford (40.5% similar) New Scat enterprises h-beam connecting rods for small block 302 ford applications. Rods are still in sealed packaging...(March 15th, 2021)
• Scat Engine Components 2-ls1-6100-2100-945 2-ls161002100945-1 Pro Sport H-beam Connecting Rod For Chevy Sbc Ls (46.8% similar) Connecting rod bolt material: 8740 chorally steel. Connecting rod length to in.: 6.100 in. Connecting rod beam style: h-beam material: forged 4340 steel wrist pin floating end bore diameter: 0.945 in...(September 25th, 2023)
• Scat 310198922 Stock Replacement I-beam Connecting Rods (49.3% similar) Stock replacement i-beam connecting rods big block CHEVY7/16 BOLTS8/PKG Scat 310198922 rods, BOLTS8/PKG, this product ships directly from the manufacturer...(October 3rd, 2023)
• Scat Engine Components 2-350-6000-2100a Connecting Rods 4340 Hbeam 12point Cap Screw 6.0 Length Sset Of 8 6600021a (43.1% similar) length , chevy, small block, set of connecting rods, 4340, h-beam, 12-POINT, cap screw, 6.000 in. Please hover mouse to image...(October 16th, 2023)
• Scat 2-350-6000-2000a 6600020 H-beam Connecting Rods 6.000 Long 2.000 Sm Jrnl 4340 Steel 8pcs (45.7% similar) 6.000 long, 2.000 small JOURNAL.927 pin, 7/16 arp 2000 bolts. Connecting rods, Scat 6600020 2-350-6000- 2000 A Sb chevy h-beam rods. Big end width .890, 674 grams, 8 pieces...(October 19th, 2023)
• Scat Engine Components 2-icr6000-7 16 Connecting Rods 4340 I-beam 12-point Cap Screw 6.000 Inch Length Sbc Setof8 (44.2% similar) Please hover mouse to image. Cleft engine parts CB663HN rod bearing series. Vehicle fitment. Use this to fill in any hashtags for search. Scat engine components 26000716 connecting rods, 4340, i-beam, 12-POINT, cap screw, 6.000 in. Fitment information may not be available for all products and those ...(November 6th, 2023)
• Scat Engine Components 2-icr5090 Connecting Rods 4340 I-beam Hex Head Thru-bolt 5.090 Inch Len Ford 5.0l 302of8 (33% similar) length , ford, 5.0L/302, set of use this to fill in any hashtags for search. Please hover mouse to image. Arp oil pump bolt kit 150-6902. Fitment information may not be available for all products and those without fitment will have a compatibility link. Scat engine components connecting rods, 4340...(November 25th, 2023)
• Scat Engine Components 2-icr6135 Connecting Rods 4340 I-beam 12-point Cap Screw 6.135 Length Bset Of 8 26135 (41.4% similar) Scat engine components connecting rods, 4340, i-beam, 12-POINT, cap screw, 6.135 in. Please hover mouse to image. length , chevy, big block, set of...(December 3rd, 2023)
• Scat Engine Components 2-icr6700-7 16 Connecting Rods 4340 I-beam 12-point Cap Screw 6.700 Inch Length Chevy Big Block Set (41.5% similar) Please hover mouse to image. Scat pro comp i-beam connecting rods...(December 17th, 2023)
• Mopar 04893211aa Connecting Rod 6.4l 392 Hemi Ram 14-2021 2500 3500 Scat Pack (32.6% similar) 1 used stock 6.4 hem 392 connecting rod. No rods with spun bearing but they are used and the picture is a stock photo not actual part...(January 31st, 2024)