1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 8662102085044502
  3. ARP ARP-201-4306

ARP ARP-201-4306 Head Stud Kit

fits model: S1000rr. make: Bmw.

Arp-201-4306 Arp Head Stud Kit Bmw S1000rr

( Brand: Arp ), ( Manufacturer Part Number: ARP-201-4306 ), ( Type: Head Stud Kit ), ( Material: Steel ), ( Country/region Of Manufacture: United States ), ( Performance Part: Yes )

Review ARP Head Stud Kit Bmw fits S1000RR

ARP ARP-201-4306 Head Stud Kit for BMW S1000RR - Enhanced Performance and Durability

The ARP ARP-201-4306 Head Stud Kit is an exceptional upgrade for your BMW S1000RR engine, designed to deliver enhanced performance, reliability, and durability. This kit replaces the original head studs, providing a stronger and more robust connection between the cylinder head and the engine block.

Crafted from high-strength, 2000 series aerospace-grade titanium, the ARP head studs offer unparalleled resistance to fatigue, thermal stress, and torque loads. Each stud is precision-machined to ensure perfect fitment and optimal clamping force, resulting in reduced head gasket failure and improved engine performance.

The ARP-201-4306 kit comes with eight (8) ARP2000 head studs, eight (8) ARP nuts, and eight (8) ARP washers. The ARP nuts are made from forged 6262-T6 aluminum and are designed to distribute the clamping force evenly across the head stud threads, reducing the risk of thread failure. The ARP washers are made from high-tensile steel and are designed to prevent galling and seizing of the studs and nuts.

The installation of the ARP head stud kit requires professional expertise and tools. By upgrading to the ARP-201-4306, you are not only enhancing the performance potential of your BMW S1000RR engine but also increasing its durability and reliability. This upgrade is particularly beneficial for high-performance applications, such as racing and track days, where the engine is subjected to extreme stress and heat.

In conclusion, the ARP ARP-201-4306 Head Stud Kit for BMW S1000RR is a high-quality, performance-oriented upgrade that delivers increased strength, durability, and reliability. By replacing the original head studs with the ARP2000 studs, you are investing in a more robust and dependable engine that can handle the demands of high-performance riding.

The ARP ARP-201-4306 Head Stud Kit for BMW S1000RR is a performance upgrade for the engine head bolts. Here are the pros and cons of this purchase to help you make an informed decision:

Pros:

1. Enhanced durability: ARP head studs are known for their superior strength and durability, offering greater resistance to fatigue and failure compared to OEM bolts.

2. Improved clamping load: ARP studs maintain a consistent clamping load, which is crucial for optimal engine performance and long-term reliability.

3. Safety: ARP studs reduce the risk of catastrophic engine failure due to bolt breakage, especially under high-stress racing conditions.

4. Potential power gains: By ensuring proper head-to-block sealing and eliminating possible bolt-related power loss, ARP head studs may improve overall engine performance.

Cons:

1. Cost: ARP head stud kits are typically more expensive than OEM bolts, which can be a significant investment for some riders.

2. Installation: Proper installation of ARP head studs requires specialized tools and a good understanding of engine mechanics. Improper installation could lead to engine damage.

3. Potential engine disassembly: Installing ARP head studs may require engine disassembly, which can be time-consuming and costly.

4. Non-OEM components: Using non-OEM components like ARP head studs can void your vehicle's warranty, if applicable.

Conclusion:

If you are a performance-oriented BMW S1000RR rider or racer looking to enhance engine durability and potentially improve performance, the ARP ARP-201-4306 Head Stud Kit could be a worthwhile investment. However, consider the increased cost, potential need for engine disassembly, and the voiding of your vehicle's warranty before making a decision. If you're unsure about the installation process, it may be best to seek the help of a professional mechanic or race shop.

Details:

To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Screw studs into the block HAND TIGHT ONLY. The 12-point nuts feature a hardened, parallel-ground washer face and precision thread-rolling process for consistent, accurate torque values. Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT.

This is due to higher friction on the studs as well inconsistencies in clamping force of fasteners when motor oil or other low quality lubricants are used. Installation Instructions: Install the cylinder head and check for binding or misalignment. Look for obvious defects or shipping damages, plus proper fit, length and dimension.

Chase if necessary with ARP Thread Chaser. Clean and inspect all hardware prior to installation. This means allowing the engine to warm up its normal operating temperature, remain at temperature for several minutes ensure each component is uniformly heated, then turned off and cooled completely ambient. The studs are heat-treated to 200,000 psi tensile strength and precision-machined ensure consistent, accurate torque values.

Then install the washers and nuts onto studs tighten them hand tight. The parallel ground washers included in the kit are designed to distribute clamping load evenly across cylinder head, reducing risk of head gasket failure. If the cylinder head studs protrude into a water jacket, lubricate block threads of with ARP THREAD SEALER. ARP recommends using the ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to motor oil.

part #: arp-201-4306 prices

  • $272.99-$411.04

specifications pistonrinro:

  • for models: S1000rr
  • for makes: Bmw
  • brand: Arp
  • mpn: Arp-201-4306
  • type: Head Stud Kit
  • material: Steel
  • country/region of manufacture: United States
  • performance part: Yes

returns pistonrinro:

  • policy: No Returns

shipping pistonrinro:

  • transit: 3-8 Days
  • carrier: UPS
  • class: Standard
  • cost: $15.48
  • type: Calculated
  • service: UPS Ground

general pistonrinro:

  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts
  • condition: New

seller pistonrinro:

  • rating: 100.0%
  • # reviews: 37
  • city: Philadelphia, Pennsylvania

offer pistonrinro:

  • availability: In Stock
  • quantity: 5
  • started: April 22, 2025
  • options: Ship-to-home
  • sold: 0

payments pistonrinro:

  • wallet: Google-pay
  • other
  • credit card: Mastercard
for models: s1000rr, for makes: bmw, type: head stud kit, country/region of manufacture: united states, performance part: yes,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: steel, sku: 8662102085044502,
Arp ARP-201-4306 Is Similar To:
pistonrinro logo
5 offers $272.99–$411.04 USD
  • New. Offer #1 priced at $272.99 + $0.00 shipping estimate = $272.99* total. Head Stud Kit, BMW S 1000 RR Motorcycle, 10 mm 12-Point, 3 mm Allen ARP 201-4306 Head Stud Kit BMW S 1000 RR Motorcycle.FREE SHIPPING
  • New. Offer #2 priced at $308.11 + $0.00 shipping estimate = $308.11* total. ARP AM4.125-1LB Universal Stud M10 x 1.25mm Top Thread Size Black 4.125" Length. Open Box ARP 208-4307 12pt.FREE SHIPPING
  • New. Offer #3 priced at $411.04 + $15.99 shipping estimate = $427.03* total. ARP BMW S1000RR Head Stud Kit.+$15.99 shipping
  • New. Offer #4 priced at $290.19 + $0.00 shipping estimate = $290.19* total. FREE SHIPPING
  • New. Offer #5 priced at $290.19 + $0.00 shipping estimate = $290.19* total. Custom or special-order parts. ARP 206 fits BMW 01-43 S1000RR Head Stud Kit.FREE SHIPPING

Copyright © pistonrinro.com