1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 12783056592769771
  3. MAXPEEDINGRODS I1DZCA

MAXPEEDINGRODS I1DZCA Steel Beam Connecting Rods Arp Bolts 149.7MM

fits model: F22c, S2000. make: Acura, Honda.

I1dzca Maxpeedingrods Steel H-beam Connecting Rods Arp Bolts For Acura And Honda F22c S2000 149.7mm T V

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: I1DZCA ), ( Part Type: Rod Bolt ), ( Big End Diameter: 51mm ), ( Big End Width: 23.8mm ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Fitment Type: Performance/custom ), ( Hp Rating: Around 600-800hp ), ( Material: Forged 4340 Aircraft Chrome Moly Quality Steel ), ( Notice: This Is Aftermarket Replcement Part. ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Quantity: 4 Pieces Of H-beam Connecting Rods ), ( Rod Length: 149.7mm ), ( Small End Diameter: 23mm ), ( Surface Finish: Extra Cost For Upgrading To Arp L19 Bolts ), ( Weight Tolerance: Balanced To / 1 Gram In Set )

Review MAXPEEDINGRODS Steel H beam Connecting Rods Arp Bolts Acura And Honda 149.7mm fits F22C S2000

The **MaxpeedingRods I1DZCA Steel H-Beam Connecting Rods** paired with **ARP 1000 bolts** represent a meticulously engineered upgrade designed to transform the performance and durability of the legendary **Acura/Honda F22C engine** found in the S2000 and other applications. Crafted from **high-grade aircraft-quality 4340 steel**, these **H-beam connecting rods** are forged to exacting standards, ensuring superior strength, rigidity, and resistance to fatigue critical attributes for high-revving, high-stress applications. The **149.7mm rod length** maintains precise clearance with the crankshaft, preserving the stock engine s geometry while delivering a **30-50% increase in fatigue life** compared to stock castings, thanks to their **optimized cross-sectional design** and **heat-treated tempering process**. The **ARP 1000 bolts**, featuring **100,000 psi tensile strength**, are pre-loaded to **180 ft-lbs** (or as specified by the builder) and include **ARP s proprietary thread-locking compound** to prevent loosening under extreme G-forces, making them ideal for forced induction, high-RPM tuning, or aggressive driving scenarios. Together, this kit eliminates the weakest link in the bottom end, allowing for **significantly higher power outputs** whether through nitrous, turbocharging, or aggressive camshafts without compromising reliability. The **precision-machined rod journals** ensure smooth operation with stock or upgraded bearings, while the **smooth, polished rod ends** reduce friction and wear on the crankshaft. Whether you re pushing the S2000 to its limits on the track, preparing for a forced induction build, or simply seeking a future-proof upgrade for daily driving, these **I1DZCA rods and ARP bolts** provide the structural integrity and performance edge required to extract every ounce of potential from the F22C s legendary architecture. Built to withstand the demands of modern tuning, this kit is a **must-have for serious builders** who refuse to compromise on strength or performance.

**Pros and Cons of Buying Maxpeedingrods I1DZCA Steel H-Beam Connecting Rods with ARP Bolts for the Acura/Honda F22C S2000 (149.7mm)**

**Pros:**

1. **Strength and Durability** Steel H-beam connecting rods are significantly stronger than stock forged aluminum rods. They are designed to handle higher torque loads, making them ideal for high-performance applications, forced induction, or aggressive tuning. The I1DZCA model is specifically engineered for the F22C engine, ensuring a proper fit and optimized performance.

2. **Compatibility with ARP Bolts** The inclusion of ARP bolts (Advanced Racing Products) is a major advantage. ARP bolts are known for their superior strength and reliability, often outperforming stock bolts in high-stress applications. This combination ensures that the rod assembly can handle extreme power levels without failure, reducing the risk of catastrophic engine damage.

3. **Improved Reliability** Forced induction (turbocharging or supercharging) or high-revving applications place immense stress on connecting rods. Steel rods, combined with ARP bolts, provide a substantial upgrade in reliability compared to stock components, which may fail under prolonged or extreme stress.

4. **Longevity** High-quality steel rods and bolts are built to last, even under aggressive driving conditions. This can be particularly valuable for enthusiasts who plan to keep their engines running for many years or who participate in track use, where components are subjected to repeated high-stress cycles.

5. **Engineered for the F22C** Maxpeedingrods designs its rods specifically for the F22C engine architecture, ensuring proper rod length (149.7mm), spacing, and fitment. This reduces the risk of interference or clearance issues that could arise with aftermarket rods designed for other engines.

6. **Support for High-Performance Modifications** If you are planning to push your S2000 beyond stock specifications whether through forced induction, nitrous, or aggressive tuning these rods and bolts provide a critical foundation for handling increased power output.

7. **Warranty and Support** Reputable manufacturers like Maxpeedingrods often provide warranties on their products, offering peace of mind in case of manufacturing defects. Additionally, they typically offer customer support for installation guidance or troubleshooting.

---

**Cons:**

1. **Cost** Steel H-beam rods and ARP bolts are significantly more expensive than stock components. The price point may be prohibitive for casual enthusiasts or those on a tight budget, especially when considering that the entire rod assembly (including bolts) may cost several hundred dollars.

2. **Installation Complexity** Replacing connecting rods is a labor-intensive process that typically requires disassembling the engine, removing the crankshaft, and carefully installing the new rods. This is not a DIY job for beginners and may require professional help, adding to the overall cost.

3. **Weight** Steel rods are heavier than aluminum stock rods. While the weight difference is relatively small in the context of the entire engine, it may contribute to slightly reduced high-RPM responsiveness or slight changes in engine balance. However, this is usually negligible compared to the benefits of strength and reliability.

4. **Potential for Overkill** If you are not planning to significantly increase power output (e.g., stock or mild tuning), the upgrade may not be necessary. For drivers who primarily use their S2000 for daily commuting or light track use without forced induction, the stock rods and bolts may suffice.

5. **Compatibility with Other Modifications** While the I1DZCA rods are designed for the F22C, you must ensure they are compatible with any other modifications you have planned (e.g., crankshaft, pistons, or camshafts). Mismatched components could lead to issues like rod-to-piston clearance or crankshaft balance problems.

6. **Time and Downtime** The installation process can take several hours, if not days, depending on your experience and the condition of your engine. This downtime may be inconvenient, especially if you rely on your S2000 for regular driving.

7. **Resale Value Impact** High-performance modifications, while beneficial for performance, can sometimes reduce the resale value of a vehicle. Potential buyers may be deterred by the cost of the rods and bolts, though this is subjective and depends on the market.

---

**Conclusion:**

The Maxpeedingrods I1DZCA steel H-beam connecting rods with ARP bolts are a premium upgrade for the Acura/Honda F22C S2000, particularly for drivers who are pushing their engines with forced induction, nitrous, or aggressive tuning. The strength, reliability, and compatibility with the F22C make this an excellent choice for enthusiasts who prioritize durability and performance over cost. However, the high cost, complexity of installation, and potential overkill for mild applications mean this upgrade is best suited for serious tuners or track-focused drivers.

If your primary goal is to maximize power output, reliability, and longevity especially under extreme conditions this is a highly recommended upgrade. For those who are content with stock or mild modifications, the investment may not be justified.

**Recommendation:** Purchase these rods and bolts if:

- You are running or planning to run forced induction (turbo/supercharger) or significant power increases.

- You participate in track use or aggressive driving where reliability is critical.

- You have already committed to other high-performance modifications (e.g., crankshaft, pistons, or camshafts) that justify the upgrade.

- You are prepared for the installation labor and cost.

Avoid this upgrade if:

- You are on a tight budget and only plan mild tuning or stock use.

- You are not comfortable with the complexity of engine disassembly or prefer to leave installation to professionals.

- You prioritize weight savings or high-RPM responsiveness over strength and reliability.

Details:

T V PRODUCT TEST AND ISO 9001 CERTIFIED, Shot-preened finish to remove potential for stress risers, 6.High precision CNC machined,Precision rod cap alignment dowels, 7.Bores finished /- .005mm, 8.Balanced within 1per rod, 9. It begins from the date purchased. Fast Shipping.

Best Costumer Service. >>you might also like. Factory Warranty. offers a minimum one year, unlimited mileage warranty on most of parts sold, some are otherwise noted longer manufacturer.

Application, For Acura Honda F22C S20 Pin Type: Floating Piston. Advertised Horsepower Rating:200HP/piece, Top acceleration: 9000rpm, package size 28CM 21CM 10CM.

specifications pistonrinro:

  • for models: F22c, S2000
  • for makes: Acura, Honda
  • brand: Maxpeedingrods
  • mpn: I1dzca
  • part type: Rod Bolt
  • big end diameter: 51mm
  • big end width: 23.8mm
  • california prop 65 warning: California Prop 65 Warning
  • fitment type: Performance/custom
  • hp rating: Around 600-800hp
  • material: Forged 4340 Aircraft Chrome Moly Quality Steel
  • notice: This Is Aftermarket Replcement Part.
  • pin type: Bronzed Bushing Floating Pin
  • quantity: 4 Pieces Of H-beam Connecting Rods
  • rod length: 149.7mm
  • small end diameter: 23mm
  • surface finish: Extra Cost For Upgrading To Arp L19 Bolts
  • weight tolerance: Balanced To / 1 Gram In Set

seller pistonrinro:

  • city: Rowland height, California
  • rating: 99.0%
  • # reviews: 20489

returns pistonrinro:

  • paid by: Seller
  • time: 30 Days
  • policy: Returns Accepted

payments pistonrinro:

  • wallet: Paypal
  • other
  • credit card: Mastercard

offer pistonrinro:

  • quantity: 1
  • sold: 0
  • started: March 16, 2026
  • best offers: True
  • options: Ship-to-home
  • availability: In Stock

general pistonrinro:

  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts
  • condition: New

shipping pistonrinro:

  • cost: $0.00
  • type: Fixed
  • class: Standard
  • carrier: FedEx
  • transit: 3-8 Days
  • service: FedEx Ground / FedEx Home Delivery
for models: f22c, s2000, for makes: acura, honda, part type: rod bolt, big end diameter: 51mm, big end width: 23.8mm, california prop 65 warning: california prop 65 warning, fitment type: performance/custom, hp rating: around 600-800hp, notice: this is aftermarket replcement part., pin type: bronzed bushing floating pin, quantity: 4 pieces of h-beam connecting rods, rod length: 149.7mm, small end diameter: 23mm, surface finish: extra cost for upgrading to arp l19 bolts, weight tolerance: balanced to / 1 gram in set,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: forged 4340 aircraft chrome moly quality steel, sku: 12783056592769771,
Maxpeedingrods I1DZCA Is Similar To:

Copyright © pistonrinro.com