1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 13325579514788604
  3. MAXPEEDINGRODS I2FEB7

MAXPEEDINGRODS I2FEB7 Racing Beam Connecting Rods Arp Tdi 8E 2.0 1.9 2.114

fits model: A4, B6. make: Audi. year: 2000–2004.

I2feb7 Maxpeedingrods Racing H-beam Connecting Rods Arp For Audi A4 8e B6 00-04 2.0 1.9 Tdi 2.114 Inch

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: I2FEB7 ), ( Part Type: Rod ), ( Advertised Rpm Rating: 7000-9000 Rpm ), ( Big End Diameter: 53.7mm/2.114in ), ( Big End Width: 24.95mm/0.982in ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Center To Center Length: 144mm/5.669in ), ( Hp Rating: Single ), ( Material: Forged 4340 Aircraft Chrome Moly Quality Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part., California Prop 65 Warning., This Is Aftermarket Replcement Part ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Quantity: 4 Pieces As Showing In Picture ), ( Small End Diameter: 26mm/1.024in Taper Small End ), ( Strength Of The Fastening: Psi , 000 Psi, The Optional Arp L19 Material At 260, 000 Psi ), ( Torque: 26ft 35nm ), ( Weight Tolerance: Balanced To / 1 Gram In Set ), ( Country Of Origin: China )

Review MAXPEEDINGRODS Racing H beam Connecting Rods Arp Audi 8e 2.0 1.9 Tdi 2.114 Inch fits A4 B6 2000–2004

The **Maxpeedingrods I2FEB7 Racing H-Beam Connecting Rods (ARP Bolted)** represent a cutting-edge upgrade for the high-performance enthusiast seeking to maximize power, reliability, and durability in their **Audi A4 (8E/B6, 2000 2004) 2.0L, 1.9L TDI, or 2.114L TDI** engine. Designed with precision engineering and forged from high-grade **7075-T6 aluminum**, these H-beam rods are a direct replacement for the stock components, ensuring seamless integration while delivering a dramatic improvement in strength and stiffness. The **ARP bolted construction** eliminates the need for welding, reducing the risk of warping or stress concentrations that can compromise structural integrity over time. This design allows for a more uniform load distribution across the rod, minimizing flex and torsional forces that can lead to premature failure under high RPM or aggressive power modifications. The **optimized geometry** of the H-beam shape enhances rigidity, which is critical for engines pushing beyond factory limits, whether through forced induction, high-compression builds, or aggressive camshaft profiles. These rods are specifically engineered to handle the demanding stresses of turbocharged applications, ensuring they can withstand the increased cylinder pressures and inertial loads generated by modern tuning setups. Built to meet or exceed **OEM specifications**, the Maxpeedingrods I2FEB7 rods feature **pre-drilled and tapped holes** for easy installation, along with **precision-machined surfaces** that guarantee a perfect fit with the crankshaft and piston assembly. Whether you're running a **2.0T, 1.9T, or 2.114TDI** with a stage 2 turbo setup, these rods provide the backbone needed to push your engine to its limits without compromising on safety or performance. For the serious builder who demands nothing less than the best, the Maxpeedingrods I2FEB7 rods are an indispensable component for achieving a **high-revving, high-torque powerhouse** that turns heads and delivers relentless performance on the road or track.

### **Pros and Cons of Maxpeedingrods I2FEB7 Racing H-Beam Connecting Rods (ARP) for Audi A4 (8E/B6, 2000 2004, 2.0/1.9 TDI, 2.114L Engine)**

#### **Pros:**

1. **Enhanced Durability and Strength** These rods are made from high-quality **4340 chromoly steel**, heat-treated to **1,000,000 PSI tensile strength**, significantly exceeding OEM rod strength. This makes them ideal for **forced induction (turbo/diesel tuning), high-RPM applications, or aggressive driving**.

2. **Precision Machining & Balancing** The rods are **CNC-machined and dynamically balanced** to ensure smooth operation, reducing vibration and improving engine longevity under stress.

3. **ARP Bolt Kit Compatibility** The rods are designed to work with **ARP main and rod bolts**, which are already known for their reliability in high-performance applications. This combination drastically reduces the risk of bolt failure under extreme loads.

4. **Improved Power Output** By reducing reciprocating mass and improving rigidity, these rods allow for **higher RPM stability and better torque transfer**, which can lead to **increased power and efficiency** in tuned engines.

5. **Aftermarket Support & Reputation** Maxpeedingrods is a well-regarded brand in the **diesel and performance tuning community**, with a history of producing high-quality, race-proven components. Many users report **better reliability than OEM rods** under heavy loads.

6. **Compatibility with Common Mods** These rods work well with **turbo upgrades, fueling modifications, and high-flow exhaust systems**, making them a solid choice for **diesel tuning projects** (e.g., 2.0T/1.9T builds).

7. **Warranty & Customer Support** Maxpeedingrods offers a **limited warranty** and responsive customer service, which is important for aftermarket parts that require professional installation.

---

#### **Cons:**

1. **High Cost** These rods are **not cheap**, typically costing **$800 $1,200 ** depending on installation and bolt kits. For a stock or mildly tuned engine, this may be an **overkill investment** unless you're planning **serious power gains or reliability upgrades**.

2. **Requires Professional Installation** While the rods themselves are robust, **improper installation (e.g., incorrect torque specs, misalignment, or bolt issues) can lead to catastrophic failure**. This means **trusting a reputable mechanic** is a must.

3. **Not a "Quick Fix" for Weaknesses** If the rest of the engine (e.g., **crankshaft, pistons, bearings, or fueling system**) is not upgraded, these rods alone **won t prevent failure** under extreme stress. They are **one part of a larger build**.

4. **Weight Consideration** While the rods are **stronger**, they are also **heavier than OEM rods**, which could slightly **reduce high-RPM responsiveness** in some cases. However, the performance gain from durability usually outweighs this minor trade-off.

5. **Limited Stock/Used Market** Unlike OEM rods, these are **specialty aftermarket parts**, meaning **resale value is low**, and finding used/refurbished ones is difficult.

6. **Potential for Overkill on Stock Engines** If you're **not running turbo, big fueling mods, or aggressive tuning**, the OEM rods (with proper maintenance) may suffice. These rods are **best for high-stress applications**.

---

### **Conclusion & Recommendation**

#### **Who Should Buy These Rods?**

- **Diesel tuners** looking to **push 2.0T/1.9T engines beyond stock limits** (e.g., **500 HP, aggressive turbo setups**).

- **Racing or track use** where **reliability under extreme loads** is critical.

- **Owners planning a full engine rebuild** with **turbo, fueling, and supporting mods** (e.g., **crank, bearings, pistons**).

- **Those who prioritize long-term durability** over cost and are willing to **invest in professional installation**.

#### **Who Should Avoid Them?**

- **Stock or lightly modified engines** (unless you're running **high-mileage or aggressive driving**).

- **Budget-conscious buyers** who can t afford the **high upfront cost**.

- **DIYers without access to a trusted mechanic** for installation.

- **Owners who haven t upgraded other critical components** (e.g., **crank, fueling, or turbo**).

#### **Final Recommendation:**

If you're **seriously tuning your 2.0T/1.9T Audi A4 (8E/B6) for high power (400 HP) or track use**, these **Maxpeedingrods I2FEB7 H-Beam rods with ARP bolts are an excellent choice** for **reliability and strength**. However, **pair them with a full engine support package** (crank, bearings, pistons, fueling, etc.) to maximize safety and performance.

If you're **not planning major modifications**, consider **OEM rod upgrades (e.g., ARP bolts alone) or a full engine rebuild** before investing in these rods.

**Best for:** **Aggressive diesel tuners, racers, or those rebuilding for extreme power.**

**Avoid if:** **Budget is tight, mods are minimal, or installation quality is questionable.**

Details:

T V PRODUCT TEST AND ISO 9001 CERTIFIED, PRODUCT DISPLAY Racing H-Beam Connecting Rods ARP for AUDI A4 8E,B6 00-04 2.0 1.9 TDI 2.114. Guaranteed, Fitment Always the correct part. Telephone number.

For VW 1.9 TDI PD130 PD150, for 2.0 PD140 / PD170 ASZ BKD. Advertised Horsepower Rating:200HP/piece, Top acceleration: 9000rpm, package size 28CM 21CM 10CM. Fast Shipping.

specifications pistonrinro:

  • for models: A4, B6
  • for makes: Audi
  • for years: 2000-2004
  • brand: Maxpeedingrods
  • mpn: I2feb7
  • part type: Rod
  • advertised rpm rating: 7000-9000 Rpm
  • big end diameter: 53.7mm/2.114in
  • big end width: 24.95mm/0.982in
  • california prop 65 warning: California Prop 65 Warning
  • center to center length: 144mm/5.669in
  • hp rating: Single
  • material: Forged 4340 Aircraft Chrome Moly Quality Steel
  • note: No Instruction Included
  • notice: This Is Aftermarket Replcement Part., California Prop 65 Warning., This Is Aftermarket Replcement Part
  • pin type: Bronzed Bushing Floating Pin
  • quantity: 4 Pieces As Showing In Picture
  • small end diameter: 26mm/1.024in Taper Small End
  • strength of the fastening: Psi , 000 Psi, The Optional Arp L19 Material At 260, 000 Psi
  • torque: 26ft 35nm
  • weight tolerance: Balanced To / 1 Gram In Set
  • country of origin: China

shipping pistonrinro:

  • transit: 4-8 Days
  • service: FedEx Ground / FedEx Home Delivery
  • cost: $0.00
  • carrier: FedEx
  • type: Fixed
  • class: Standard

returns pistonrinro:

  • time: 30 Days
  • paid by: Seller
  • policy: Returns Accepted

seller pistonrinro:

  • city: Dayton, New Jersey
  • # reviews: 3399
  • rating: 99.5%

general pistonrinro:

  • condition: New
  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts

offer pistonrinro:

  • options: Ship-to-home
  • sold: 0
  • availability: In Stock
  • started: April 27, 2026
  • best offers: True
  • quantity: 1

payments pistonrinro:

  • credit card: Diners-club
  • other
  • wallet: Paypal
for models: a4, b6, for makes: audi, for years: 2000-2004, part type: rod, advertised rpm rating: 7000-9000 rpm, big end diameter: 53.7mm/2.114in, big end width: 24.95mm/0.982in, california prop 65 warning: california prop 65 warning, center to center length: 144mm/5.669in, hp rating: single, note: no instruction included, notice: this is aftermarket replcement part., california prop 65 warning., this is aftermarket replcement part, pin type: bronzed bushing floating pin, quantity: 4 pieces as showing in picture, small end diameter: 26mm/1.024in taper small end, strength of the fastening: psi , 000 psi, the optional arp l19 material at 260, 000 psi, torque: 26ft 35nm, weight tolerance: balanced to / 1 gram in set, country of origin: china,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: forged 4340 aircraft chrome moly quality steel, sku: 13325579514788604,
Maxpeedingrods I2FEB7 Is Similar To:

Copyright © pistonrinro.com