1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 13137298315518751
  3. MAXPEEDINGRODS IC5LX0

MAXPEEDINGRODS IC5LX0 Forged Beam Connecting Rods Arp Bolts 4PCS Ltg 2.0T 6.004FTFT

fits model: Ats. make: Cadillac.

Ic5lx0 Maxpeedingrods 4pcs Forged H-beam Connecting Rods Arp Bolts For Cadillac Ats Ltg 2.0t 6.004ftft

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: IC5LX0 ), ( Big End Diameter: 52.125mm/2.052 ), ( Big End Width: 26.467mm/1.042 ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Fitment Type: Performance/custom ), ( Hp Rating: Around 600-800hp ), ( Ipn: 2.0t ), ( Manufacturer Warranty: 2 Years ), ( Material: Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Quantity: 4 Pieces Of H-beam Connecting Rods ), ( Rod Length: 152.5mm/6.004 ), ( Small End Diameter: 24mm/0.945 ), ( Surface Finish: Extra Cost For Upgrading To Arp L19 Bolts ), ( Type: Connecting Rod Set ), ( Weight Tolerance: Balanced To / 1 Gram In Set )

Review MAXPEEDINGRODS 4pcs Forged H beam Connecting Rods Arp Bolts Cadillac Ltg 2.0t 6.004ftft fits ATS

The **Maxpeedingrods IC5LX0 4-Piece Forged H-Beam Connecting Rods** paired with **ARP 1000 Series Bolts** represent a premium, high-performance upgrade designed exclusively for the **Cadillac ATS-V LTG and LTG 2.0T** engines, delivering unmatched strength, precision, and reliability for both street and track applications. Crafted from **high-grade 4340 forged steel**, these **H-beam connecting rods** are engineered to withstand extreme loads, torsional stress, and high RPM demands, making them an ideal choice for enthusiasts pushing the boundaries of their naturally aspirated or forced-induction LTG engines. The **H-beam design** enhances rigidity and reduces weight compared to traditional I-beam rods, improving power transfer and reducing internal engine flex, which translates to smoother operation, increased durability, and the potential for higher horsepower and torque outputs. Each rod is **precision-machined to exacting tolerances**, ensuring a perfect fit with the crankshaft journals and main caps, minimizing clearance issues and maximizing structural integrity.

Complementing these rods are the **ARP 1000 Series bolts**, a legendary choice for high-performance applications. These **high-strength, heat-treated bolts** feature a **100% threaded design** with a **fine-pitch thread** for superior clamping force distribution, eliminating the risk of bolt stretch or failure under extreme conditions. The **ARP 1000 bolts** are **pre-loaded to manufacturer specifications**, ensuring optimal tension and preventing rod bearing misalignment a critical factor in maintaining engine longevity and performance. The **black oxide finish** on both the rods and bolts not only provides corrosion resistance but also enhances their aesthetic appeal, giving the engine a sleek, professional look. Installation of these components requires **proper torque specifications** and **alignment techniques**, as they are designed to be used with **high-quality rod bearings** (such as **Clevite or INA**) to ensure a seamless fit and optimal lubrication.

Beyond their mechanical advantages, these **Maxpeedingrods IC5LX0 rods and ARP bolts** are a testament to the brand s commitment to **engineering excellence and performance optimization**. Whether you're preparing your LTG for **high-RPM spirited driving, forced induction builds, or track-focused modifications**, this kit provides the **rigidity, strength, and reliability** needed to handle the demands of modern high-performance applications. The **forged construction** ensures resistance to fatigue failure, while the **H-beam architecture** minimizes deflection, reducing stress on the crankshaft and bearings key factors in extending engine life and maximizing power output. For the serious builder looking to **unlock the full potential of their Cadillac ATS-V LTG**, this kit is an essential upgrade that bridges the gap between stock durability and high-performance reliability.

The Maxpeedingrods IC5LX0 forged H-beam connecting rods with ARP bolts for the Cadillac ATS LT 2.0T (6.004-inch stroke) are a high-performance upgrade designed to enhance engine durability, power output, and reliability. Below is a detailed breakdown of their pros and cons, followed by a conclusion and recommendation.

---

### **Pros**

1. **Enhanced Strength and Durability**

- Forged H-beam rods are significantly stronger than cast rods, reducing the risk of catastrophic failure under high stress. They can withstand higher RPMs, boost pressures, and aggressive power modifications without deforming or breaking.

- The forged construction distributes stress more evenly across the rod, improving fatigue resistance critical for forced induction builds or high-torque applications.

2. **Improved Power Output**

- Lighter than cast rods (though forged rods are typically heavier than billet rods, they are still stronger), these rods can help maintain rigidity while reducing mass slightly, which may contribute to better piston acceleration and power delivery.

- The ARP bolts (Advanced Racing Products) are high-performance, high-strength bolts designed to hold up under extreme loads, ensuring the rod caps stay securely fastened even under heavy stress.

3. **Compatibility with Aggressive Modifications**

- The 6.004-inch stroke compatibility suggests these rods are built for engines with longer strokes, which are common in turbocharged or supercharged applications. They can handle the increased piston speeds and loads associated with forced induction.

- The H-beam design provides a balance between strength and stiffness, making them suitable for engines running high compression ratios, nitrous oxide, or extreme power levels (e.g., 500 horsepower).

4. **Reputation of Maxpeedingrods**

- Maxpeedingrods is a well-regarded brand in the aftermarket, known for producing high-quality, precision-machined components. Their rods are often favored by tuners and racers for reliability in demanding applications.

- The company offers warranties and customer support, which can be reassuring for buyers investing in a high-end upgrade.

5. **Potential for Longevity**

- Forged rods are less prone to cracking or warping compared to cast rods, which can fail under prolonged high-stress conditions. This makes them a long-term investment for engines subjected to heavy use or modifications.

6. **Custom Fit and Precision**

- These rods are likely machined to exact specifications for the Cadillac ATS LT 2.0T, ensuring a proper fit without clearance issues. Precision machining reduces the risk of binding or misalignment, which can cause premature wear.

---

### **Cons**

1. **Cost**

- Forged H-beam rods with ARP bolts are significantly more expensive than OEM or aftermarket cast rods. The price point may be prohibitive for casual enthusiasts or those on a tight budget, especially when factoring in labor costs for installation.

- The total cost of ownership includes not only the rods and bolts but also potential additional modifications (e.g., upgraded main bearings, oil pump, or crankshaft) to fully leverage their benefits.

2. **Installation Complexity**

- Replacing connecting rods is a labor-intensive process that typically requires removing the engine from the vehicle, disassembling the crankshaft, and carefully installing the new rods with proper alignment and torque specifications.

- Improper installation can lead to catastrophic failure, so this job is best left to experienced mechanics. The cost of labor can add thousands of dollars to the total expense.

3. **Weight**

- While forged rods are stronger than cast rods, they are also heavier. This added weight can slightly reduce piston acceleration, though the impact is often negligible compared to the benefits of strength and durability. In high-RPM applications, the weight may contribute to slightly reduced top-end power.

4. **Limited Use Case for Stock Engines**

- If the Cadillac ATS LT 2.0T engine is running stock power levels (e.g., 240 270 horsepower), the upgrade may be overkill. Forged rods are best suited for engines with significant modifications (e.g., turbocharging, nitrous, or high-compression kits). Stock engines may not justify the cost or benefit from this level of upgrade.

5. **Compatibility and Clearance Considerations**

- While Maxpeedingrods rods are designed for the 6.004-inch stroke, there is always a risk of interference with other components (e.g., pistons, oil squirters, or rod bearings) if the engine has been modified in other ways. Thorough inspection and potential additional machining may be required to ensure compatibility.

- The ARP bolts require precise torqueing to avoid overtightening (which can strip threads) or undertightening (which can lead to loosening). This adds another layer of complexity to the installation process.

6. **Potential for Overkill**

- Some tuners argue that forged rods are only necessary for extreme builds (e.g., 1,000 horsepower or high-revving engines). For moderate power gains (e.g., 300 400 horsepower), billet rods or high-quality cast rods with upgraded bolts may suffice at a lower cost.

7. **Maintenance and Future Modifications**

- Forged rods are a permanent upgrade, meaning future modifications (e.g., crankshaft changes, piston upgrades) may require additional work to ensure compatibility. This can complicate long-term engine builds.

---

### **Conclusion**

The Maxpeedingrods IC5LX0 forged H-beam connecting rods with ARP bolts are a premium upgrade that offers substantial benefits for Cadillac ATS LT 2.0T engines undergoing significant modifications, particularly those involving forced induction, high compression, or aggressive power gains. Their strength, durability, and compatibility with longer strokes make them ideal for high-performance applications where reliability and longevity are critical. However, the high cost, complex installation, and potential overkill for stock or mildly modified engines are significant drawbacks that must be carefully considered.

For enthusiasts planning to push their engines to extreme power levels (e.g., 500 horsepower) or those prioritizing long-term reliability, these rods are an excellent investment. Conversely, those on a budget or with modest power goals may find that less expensive alternatives (e.g., billet rods or high-quality cast rods with ARP bolts) provide adequate performance without the premium price tag.

---

### **Recommendation**

- **Buy if:**

- You are building a high-performance Cadillac ATS LT 2.0T engine with forced induction (turbo/supercharger), nitrous, or significant power gains (400 horsepower).

- You prioritize durability, reliability, and the ability to handle extreme stress without failure.

- You are prepared to invest in professional installation and potentially additional supporting modifications (e.g., upgraded main bearings, oil system).

- Your budget allows for the premium cost of forged rods and ARP bolts.

- **Avoid if:**

- Your engine remains stock or is only mildly modified (e.g., minor tuning, mild turbo).

- You are operating on a tight budget and can achieve similar performance gains with less expensive alternatives.

- You lack access to experienced mechanics for installation, as improper fitting can lead to catastrophic failure.

- You are unsure about future modifications that could interfere with the rods or require additional adjustments.

For most stock or mildly modified ATS LT 2.0T engines, a more cost-effective approach might include upgrading to billet rods (e.g., from brands like JE or Scat) paired with ARP bolts, or investing in a high-quality cast rod kit with upgraded bolts. However, if you are committed to a high-performance build, the Maxpeedingrods rods are a top-tier choice worth considering. Always consult with a trusted engine builder or tuner to ensure the upgrade aligns with your specific goals and engine setup.

Details:

Application, Compatible for Cadillac ATS LTG 2.0T, 2.0L Exotic 13-18, Pin Type: Floating Piston. Quick, Simple.guaranteed Fitment. V PRODUCT TEST AND ISO 9001 CERTIFIED, 2.

Shot-preened finish to remove potential for stress risers, 6.High precision CNC machined,Precision rod cap alignment dowels, 7.Bores finished /- .005mm, 8.Balanced within 1per rod, 9. Manufacturer. Fast Shipping. Advertised Horsepower Rating:200HP/piece, Top acceleration: 9000rpm, package size 28CM 21CM 10CM.

Always the correct part.

specifications pistonrinro:

  • for models: Ats
  • for makes: Cadillac
  • brand: Maxpeedingrods
  • mpn: Ic5lx0
  • big end diameter: 52.125mm/2.052
  • big end width: 26.467mm/1.042
  • california prop 65 warning: California Prop 65 Warning
  • fitment type: Performance/custom
  • hp rating: Around 600-800hp
  • ipn: 2.0t
  • manufacturer warranty: 2 Years
  • material: Steel
  • note: No Instruction Included
  • notice: This Is Aftermarket Replcement Part
  • pin type: Bronzed Bushing Floating Pin
  • quantity: 4 Pieces Of H-beam Connecting Rods
  • rod length: 152.5mm/6.004
  • small end diameter: 24mm/0.945
  • surface finish: Extra Cost For Upgrading To Arp L19 Bolts
  • type: Connecting Rod Set
  • weight tolerance: Balanced To / 1 Gram In Set

general pistonrinro:

  • condition: New
  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts

seller pistonrinro:

  • city: Rowland height, California
  • # reviews: 32513
  • rating: 99.5%

shipping pistonrinro:

  • carrier: FedEx
  • class: Standard
  • transit: 2-4 Days
  • cost: $0.00
  • type: Fixed
  • service: FedEx Ground / FedEx Home Delivery

offer pistonrinro:

  • options: Ship-to-home
  • availability: In Stock
  • started: April 7, 2026
  • quantity: 1
  • best offers: True
  • sold: 0

returns pistonrinro:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

payments pistonrinro:

  • other
  • wallet: Google-pay
  • credit card: Discover
for models: ats, for makes: cadillac, big end diameter: 52.125mm/2.052, big end width: 26.467mm/1.042, california prop 65 warning: california prop 65 warning, fitment type: performance/custom, hp rating: around 600-800hp, manufacturer warranty: 2 years, note: no instruction included, notice: this is aftermarket replcement part, pin type: bronzed bushing floating pin, quantity: 4 pieces of h-beam connecting rods, rod length: 152.5mm/6.004, small end diameter: 24mm/0.945, surface finish: extra cost for upgrading to arp l19 bolts, type: connecting rod set, weight tolerance: balanced to / 1 gram in set,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: steel, sku: 13137298315518751,
Maxpeedingrods IC5LX0 Is Similar To:

Copyright © pistonrinro.com