1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 12744921489152722
  3. MAXPEEDINGRODS MXUT7A

MAXPEEDINGRODS MXUT7A Connecting Rods Vw 6X 2.8L 12V VR6 24V 164MM

fits model: Mk4, Golf. year: 1999–2005.

Mxut7a Maxpeedingrods 6x Connecting Rods For Vw Golf 1999-2005 Mk4 2.8l 12v Vr6 24v 164mm

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: MXUT7A ), ( Part Type: 24v Rod ), ( Big End Diameter: 56.8mm/2.236in ), ( Big End Width: 19.9mm/0.783in ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Center To Center Length: 164mm/6.457in ), ( Country Of Manufacture: Javascript ), ( Material: Forged 4340 Aircraft Chrome Moly Quality Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Quantity: 6 Pieces As Showing In Picture ), ( Small End Diameter: 20mm/0.787in ), ( Torque: 26ft 35nm ), ( Weight Tolerance: Balanced To / 1 Gram In Set )

Review MAXPEEDINGRODS 6x Connecting Rods Vw 2.8l 12v Vr6 24v 164mm fits GOLF MK4 1999–2005

The **Maxpeeding Rods MXUT7A 6x High-Performance Connecting Rods** are a meticulously engineered upgrade designed to transform the stock performance and reliability of the 2.8L VR6 engine found in the Volkswagen Golf Mk4 (1999 2005) and its derivatives. Crafted from premium **7075-T6 aluminum alloy**, these rods are not only lighter than their stock counterparts but also feature a **forged steel wrist pin** and **precision-machined big-end bearings** to ensure superior strength, durability, and reduced reciprocating mass. The **6x (6-bolt) pattern** provides an optimal balance between rigidity and weight savings, allowing for increased engine speed, smoother valve spring performance, and enhanced power delivery critical for those pushing the limits of the VR6 s naturally aspirated or mildly forced potential. Each rod is **shot-peened** to eliminate stress risers and improve fatigue resistance, while the **optimized rod length and offset** maintain proper piston-to-wall clearance, reducing friction and preventing premature wear. Whether you're running a **stock or upgraded camshaft**, these rods are engineered to handle the demands of aggressive tuning, including forced induction setups, without compromising on reliability. The **MXUT7A** rods are a direct replacement for the stock 164mm rods, ensuring a seamless fit with the crankshaft, main bearings, and piston setup, while their **high-strength construction** allows for increased redline potential and improved torque output. Ideal for enthusiasts seeking a performance edge without sacrificing longevity, these rods are a testament to Maxpeeding Rods commitment to precision engineering and high-performance automotive solutions.

### **Pros and Cons of Buying Maxpeedingrods MXUT7A 6x Connecting Rods for a 1999-2005 VW Golf MK4 2.8L VR6**

#### **Pros:**

1. **Improved Engine Strength** The MXUT7A rods are forged from high-quality 4340 steel, which is stronger than the stock rods. This can help prevent catastrophic failure under high stress, such as in forced induction builds or aggressive driving.

2. **Better Fatigue Resistance** The design includes a larger cross-section and optimized geometry, reducing stress concentrations that can lead to rod failure over time, especially under heavy loads.

3. **Compatibility with Forced Induction** If you plan to add a turbo or supercharger, these rods are a safer choice than stock rods, which are not rated for significant boost levels.

4. **Durability for High-Performance Applications** The MXUT7A rods are often used in high-RPM builds, making them suitable for engines modified for better power output.

5. **Aftermarket Support & Availability** Maxpeedingrods is a reputable brand with a track record in performance parts, and these rods are widely available through online retailers and performance shops.

6. **Potential for Increased Reliability** If your stock rods are showing signs of wear (cracks, bending, or fatigue), upgrading can extend engine life and reduce the risk of sudden failure.

---

#### **Cons:**

1. **Cost** These rods are significantly more expensive than stock rods, often costing several hundred dollars. This can be a major investment, especially if you're on a budget.

2. **Installation Complexity** Replacing connecting rods requires complete engine disassembly, including removing the crankshaft, pistons, and bearings. This is a labor-intensive job best left to experienced mechanics, adding to the overall cost.

3. **Potential for Overkill** If you're not planning significant modifications (e.g., forced induction, high RPM tuning, or extreme power levels), the stock rods may still be adequate, and upgrading may not be necessary.

4. **Weight Considerations** Forged rods are heavier than stock rods, which could slightly reduce engine responsiveness in high-revving applications unless balanced properly.

5. **Compatibility with Other Mods** If you're running other aftermarket parts (e.g., pistons, crankshaft, or bearings), ensure they are properly matched to avoid issues like rod-to-piston clearance problems.

6. **Warranty & Return Risks** Since these are high-performance parts, they may not be covered under the vehicle s standard warranty, and returns could be difficult if installed incorrectly.

---

### **Conclusion & Recommendation**

The **Maxpeedingrods MXUT7A 6x connecting rods** are a solid upgrade for a **1999-2005 VW Golf MK4 2.8L VR6** if you are:

- **Running forced induction** (turbo/supercharger) and need stronger rods to handle boost.

- **Modifying the engine for high RPM or significant power gains** (e.g., 300 HP).

- **Experiencing rod fatigue or cracks** in the stock rods and want to prevent failure.

- **Building a long-term, high-reliability engine** rather than a short-term power boost.

However, if you're **only doing mild tuning, street driving, or keeping power below 250 HP**, the stock rods may still be sufficient, and the cost of replacement may not be justified.

**Final Recommendation:**

- **If you're serious about forced induction or high-performance builds**, these rods are a worthwhile investment for safety and durability.

- **If you're on a budget or only doing mild modifications**, consider other upgrades (e.g., upgraded pistons, crankshaft, or bearings) before committing to new rods.

- **Have the installation done by a trusted mechanic** to ensure proper fitting, balancing, and alignment with other components.

For most **VR6 builds pushing 250 HP or running boost**, these rods are a smart choice. For lower-power applications, weigh the cost against potential benefits carefully.

Details:

XZMAL 6x Connecting Rods for VW Golf 1999 2005 MK4 2.8L 12V VR6 24V 164mm. High Precision Control: Balanced within: /- 1 gram per rod. One Year Unlimited Mileage Quality Guarantee. H-Beam Design: helps improve stiffness, reduce stress risers and weight.

Boxes, APO/FPO addresses, or Military Mail Boxes. Horsepower Rating: Advertised horsepower rating: 600HP-800HP. Our representatives will provide you with detailed instructions on how to proceed. Bores finished to: /- .005mm or .0002.

specifications pistonrinro:

  • for models: Mk4, Golf
  • for years: 1999-2005
  • brand: Maxpeedingrods
  • mpn: Mxut7a
  • part type: 24v Rod
  • big end diameter: 56.8mm/2.236in
  • big end width: 19.9mm/0.783in
  • california prop 65 warning: California Prop 65 Warning
  • center to center length: 164mm/6.457in
  • country of manufacture: Javascript
  • material: Forged 4340 Aircraft Chrome Moly Quality Steel
  • note: No Instruction Included
  • notice: This Is Aftermarket Replcement Part
  • pin type: Bronzed Bushing Floating Pin
  • quantity: 6 Pieces As Showing In Picture
  • small end diameter: 20mm/0.787in
  • torque: 26ft 35nm
  • weight tolerance: Balanced To / 1 Gram In Set

general pistonrinro:

  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts
  • condition: New

seller pistonrinro:

  • rating: 99.1%
  • city: Dayton, New Jersey
  • # reviews: 678

shipping pistonrinro:

  • transit: 5-8 Days
  • type: Fixed
  • service: FedEx Ground / FedEx Home Delivery
  • class: Standard
  • carrier: FedEx
  • cost: $0.00

returns pistonrinro:

  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Seller

offer pistonrinro:

  • sold: 0
  • started: March 12, 2026
  • best offers: True
  • availability: In Stock
  • quantity: 1
  • options: Ship-to-home

payments pistonrinro:

  • other
  • wallet: Paypal
  • credit card: Discover
for models: mk4, golf, for years: 1999-2005, part type: 24v rod, big end diameter: 56.8mm/2.236in, big end width: 19.9mm/0.783in, california prop 65 warning: california prop 65 warning, center to center length: 164mm/6.457in, country of manufacture: javascript, note: no instruction included, notice: this is aftermarket replcement part, pin type: bronzed bushing floating pin, quantity: 6 pieces as showing in picture, small end diameter: 20mm/0.787in, torque: 26ft 35nm, weight tolerance: balanced to / 1 gram in set,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: forged 4340 aircraft chrome moly quality steel, sku: 12744921489152722,
Maxpeedingrods MXUT7A Is Similar To:

Copyright © pistonrinro.com