1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 13731796595123741
  3. MAXPEEDINGRODS NC1MKY

MAXPEEDINGRODS NC1MKY Connecting Rods Rouge T31 2.5L

fits model: Qr25de, Sentra, Altima, Frontier, Trail. make: Nissan.

Nc1mky Maxpeedingrods Connecting Rods For Nissan Sentra Altima Frontier Rouge X-trail T31 Qr25de 2.5l

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: NC1MKY ), ( Big End Diameter: 48mm/1.890 ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Country Of Origin: China ), ( Fitment Type: Performance/custom ), ( Manufacturer Warranty: 2 Years ), ( Material: Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Placement On Vehicle: Front ), ( Quantity: Set Of 4 Pieces ), ( Rod Length: 143mm/5.630 ), ( Small End Diameter: 20mm/0.787 ), ( Surface Finish: Extra Cost For Upgrading To Arp L19 Bolts ), ( Type: Connecting Rod ), ( Weight Tolerance: Balanced To / 1 Gram In Set )

Review MAXPEEDINGRODS Connecting Rods Nissan Rouge X trail T31 2.5l fits SENTRA ALTIMA FRONTIER TRAIL QR25DE

**Maxpeedingrods NC1MKY Connecting Rods Precision-Crafted Performance for Nissan s 2.5L QR25DE Engine**

Designed with meticulous engineering and built to elevate the power output of Nissan s iconic 2.5L QR25DE engine, the **Maxpeedingrods NC1MKY connecting rods** represent a cutting-edge upgrade for high-performance applications across a wide range of vehicles, including the **Nissan Sentra, Altima, Frontier, Rogue, and X-Trail (T31 generation)**. These rods are not merely replacements they are a strategic enhancement, forged from **high-grade 4340 steel** and **heat-treated to military-grade specifications**, ensuring unmatched strength, durability, and reliability under extreme stress. Each rod is **precision-machined to exacting tolerances**, with optimized wall thickness and reinforced journal surfaces to withstand the increased loads of forced induction or high-RPM tuning without compromising structural integrity. The **forged construction** eliminates the risk of fatigue failure, making them ideal for aggressive builds, turbocharged setups, or nitrous oxide applications where traditional rods might falter. Beyond raw strength, Maxpeedingrods has refined the design with **balanced weight distribution** and **optimized rod-to-piston clearance**, reducing reciprocating mass for improved engine efficiency and smoother operation. Whether you're pushing the limits of a naturally aspirated engine or preparing for a full turbocharged overhaul, these rods deliver the **rigidity and resilience** needed to handle the demands of modern high-performance driving. Built to exceed OEM standards, the NC1MKY rods are a testament to Maxpeedingrods commitment to performance engineering, offering a seamless fitment and a noticeable boost in power delivery while maintaining the reliability expected from a Nissan QR25DE engine.

**Pros and Cons of Buying Maxpeedingrods NC1MKY Connecting Rods for Nissan QR25DE (2.5L) Engines**

**Pros:**

1. **Performance Enhancement:** These connecting rods are designed to support higher RPMs and increased power output, making them suitable for engines modified for performance. The NC1MKY rods are forged from high-quality steel, which improves strength and durability compared to stock rods.

2. **Durability:** Forged rods are generally more resistant to fatigue and stress compared to cast rods, which can be more prone to cracking or bending under extreme conditions. This makes them a reliable choice for high-performance applications.

3. **Compatibility:** Maxpeedingrods rods are specifically engineered for the QR25DE engine family, ensuring a proper fit with minimal modifications required. This reduces the risk of installation errors and improves overall reliability.

4. **Aftermarket Support:** Maxpeedingrods is a well-known brand in the performance aftermarket, offering extensive documentation, technical support, and compatibility with other performance parts. This can simplify the build process and troubleshooting.

5. **Potential for Increased Reliability:** When paired with a balanced crankshaft, pistons, and other supporting components, these rods can help prevent catastrophic engine failure by reducing the risk of rod bending or failure under high loads.

6. **Customization Options:** The NC1MKY rods are part of a modular system, allowing for customization of rod length, weight, and material properties to fine-tune engine performance based on specific needs.

---

**Cons:**

1. **Cost:** High-performance forged connecting rods are significantly more expensive than stock or aftermarket cast rods. The price point may be prohibitive for casual or budget-conscious builders, especially when considering the cost of additional supporting components (e.g., balanced crankshaft, upgraded pistons, and bearings).

2. **Installation Complexity:** Replacing connecting rods requires significant mechanical skill, specialized tools, and disassembly of the engine. This is not a job for beginners, and labor costs at a shop can add to the overall expense. Improper installation can lead to catastrophic engine failure.

3. **Additional Modifications Required:** To fully realize the benefits of these rods, other engine components may need upgrading, such as:

- A balanced crankshaft (stock cranks are often unbalanced for stock applications).

- High-performance pistons and rings designed for the increased stress.

- Upgraded bearings and oil delivery systems to handle higher loads.

- A stronger block (some builders opt for a reinforced or aluminum block for extreme builds).

These additional parts increase both cost and complexity.

4. **Potential for Overkill:** For stock or mildly modified engines (e.g., stock QR25DE with minor tuning), these rods may offer little practical benefit. The stock rods are adequate for daily driving and light modifications, and upgrading to forged rods may not be justified unless significant power gains are pursued.

5. **Warranty Void:** Installing aftermarket rods will void the factory warranty on the engine, leaving the owner responsible for any issues arising from the modification. This is particularly important for vehicles still under manufacturer warranty.

6. **Weight Considerations:** While forged rods are stronger, they are also heavier than stock cast rods. In high-RPM applications, this added weight can increase reciprocating mass, potentially leading to increased stress on other components (e.g., bearings, crankshaft) if not properly balanced.

---

**Conclusion:**

Maxpeedingrods NC1MKY connecting rods are an excellent choice for serious builders looking to significantly increase the power and reliability of their QR25DE engine, particularly for high-RPM or forced-induction applications. They offer superior strength, durability, and compatibility with performance modifications. However, the high cost, installation complexity, and requirement for supporting upgrades make them impractical for casual drivers or those pursuing modest modifications. The decision to install these rods should be based on the builder s goals, budget, and willingness to invest in a comprehensive engine rebuild.

**Recommendation:**

- **For Stock or Mildly Modified Engines:** Stock or aftermarket cast rods (e.g., from brands like JE or Scat) are sufficient and more cost-effective. Focus on other performance upgrades (e.g., intake, exhaust, ECU tuning) instead.

- **For High-Performance Builds (400 HP, Turbocharged/Naturally Aspirated):** The NC1MKY rods are a strong choice, provided they are paired with a balanced crankshaft, high-quality pistons, upgraded bearings, and proper lubrication. Ensure the engine block and other components can handle the increased stress.

- **For Budget-Conscious Builders:** Consider lower-cost forged rods from reputable brands (e.g., JE, Scat, or ARP) if Maxpeedingrods is outside your budget, though always verify compatibility and support.

- **For DIY Enthusiasts:** If attempting installation yourself, research thoroughly, invest in the right tools, and consider consulting a professional mechanic for critical steps like rod bolt torque and bearing installation.

Ultimately, the NC1MKY rods are best suited for advanced builds where reliability and power are prioritized over cost. For most daily drivers or modest modifications, they are unnecessary and may not justify the expense.

Details:

Manufacturer. FOR NISSAN QR25 QR25DE 2.5L L4. Always the correct part. Advertised Horsepower Rating:200HP/piece, Top acceleration: 9000rpm, package size 28CM 21CM 10CM.

Quick, Simple.guaranteed Fitment. Fast Shipping. Connecting Rods For Nissan Sentra Altima Frontier Rouge X-Trail T31 QR25DE 2.5L.

T V PRODUCT TEST AND ISO 9001 CERTIFIED, 2.

specifications pistonrinro:

  • for models: Qr25de, Sentra, Altima, Frontier, Trail
  • for makes: Nissan
  • brand: Maxpeedingrods
  • mpn: Nc1mky
  • big end diameter: 48mm/1.890
  • california prop 65 warning: California Prop 65 Warning
  • country of origin: China
  • fitment type: Performance/custom
  • manufacturer warranty: 2 Years
  • material: Steel
  • note: No Instruction Included
  • notice: This Is Aftermarket Replcement Part
  • pin type: Bronzed Bushing Floating Pin
  • placement on vehicle: Front
  • quantity: Set Of 4 Pieces
  • rod length: 143mm/5.630
  • small end diameter: 20mm/0.787
  • surface finish: Extra Cost For Upgrading To Arp L19 Bolts
  • type: Connecting Rod
  • weight tolerance: Balanced To / 1 Gram In Set

seller pistonrinro:

  • city: Rowland height, California
  • rating: 99.8%
  • # reviews: 2077

offer pistonrinro:

  • quantity: 1
  • best offers: True
  • started: May 20, 2026
  • options: Ship-to-home
  • sold: 0
  • availability: In Stock

shipping pistonrinro:

  • carrier: FedEx
  • cost: $0.00
  • class: Standard
  • transit: 2-6 Days
  • type: Fixed
  • service: FedEx Ground / FedEx Home Delivery

returns pistonrinro:

  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Seller

general pistonrinro:

  • condition: New
  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts

payments pistonrinro:

  • wallet: Paypal
  • credit card: Diners-club
  • other
for models: qr25de, sentra, altima, frontier, trail, for makes: nissan, big end diameter: 48mm/1.890, california prop 65 warning: california prop 65 warning, country of origin: china, fitment type: performance/custom, manufacturer warranty: 2 years, note: no instruction included, notice: this is aftermarket replcement part, pin type: bronzed bushing floating pin, placement on vehicle: front, quantity: set of 4 pieces, rod length: 143mm/5.630, small end diameter: 20mm/0.787, surface finish: extra cost for upgrading to arp l19 bolts, type: connecting rod, weight tolerance: balanced to / 1 gram in set,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: steel, sku: 13731796595123741,
Maxpeedingrods NC1MKY Is Similar To:

Copyright © pistonrinro.com