fits year: 1991–1995.

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: NP4OJM ), ( Part Type: Rod ), ( Big End Diameter: 56.8mm/2.236in ), ( Big End Width: 19.9mm/0.783in ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Center To Center Length: 164mm/6.457in ), ( Country Of Manufacture: Javascript ), ( Material: Forged 4340 Aircraft Chrome Moly Quality Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Quantity: 6 Pieces As Showing In Picture ), ( Small End Diameter: 20mm/0.787in ), ( Torque: 26ft 35nm ), ( Weight Tolerance: Balanced To / 1 Gram In Set )
Experience unparalleled power and precision with the Maxpeedingrods NP4OJM H-Beam 4340 Forged Connecting Rods, expertly designed for the VW Corrado 53i models from 1991 to 1995 with a 2.9 VR6 engine. These connecting rods, a testament to Maxpeedingrods' commitment to quality and performance, are meticulously crafted to upgrade the performance of your Corrado, ensuring a more thrilling driving experience.
Crafted from high-strength 4340 chromoly steel, these forged connecting rods exhibit exceptional durability and resistance to fatigue, even under the most demanding conditions. The H-beam design, a popular choice among performance enthusiasts, offers increased stiffness and reduced flex, translating to improved power transfer and enhanced throttle response.
The Maxpeedingrods NP4OJM H-Beam 4340 Forged Connecting Rods feature polished big ends for smooth and efficient oil flow, reducing friction and heat generation. The small ends are machined to a mirror finish for optimal piston ring seal. The rod bolts are included, ensuring a hassle-free installation process.
Each set of Maxpeedingrods connecting rods undergoes rigorous quality control, ensuring they meet the highest standards of fit, finish, and performance. By upgrading your Corrado's connecting rods with these high-performance components, you're not just enhancing your engine's reliability, but also unlocking its full potential for power and efficiency.
Don't settle for ordinary performance. Upgrade your VW Corrado 53i (1991-1995, 2.9 VR6) with the Maxpeedingrods NP4OJM H-Beam 4340 Forged Connecting Rods the perfect blend of strength, durability, and performance and take your driving experience to the next level.
Maxpeedingrods NP4OJM H-Beam 4340 Forged Connecting Rods for VW Corrado 53i (1991-1995 2.9 VR6)
Pros:1. Forged from 4340 chromoly steel, known for its strength and durability.
2. H-beam design increases strength and rigidity, reducing deflection under load.
3. Improved performance and power output compared to stock connecting rods.
4. Designed specifically for the VW Corrado 2.9 VR6 engine, ensuring a precise fit.
5. High-quality manufacturing and finishing, with attention to detail.
Cons:1. More expensive than stock connecting rods, which may be a financial consideration for some.
2. Installation may require additional engine work, such as pistons, rings, and bearings, to ensure compatibility and optimal performance.
3. Potential for increased noise and vibration, especially during high-load situations.
4. Potential for reduced fuel economy, as more power means more energy consumption.
5. If not properly installed or maintained, there is a risk of engine damage.
Conclusion:The Maxpeedingrods NP4OJM H-Beam 4340 Forged Connecting Rods offer significant performance benefits for the VW Corrado 2.9 VR6 engine. They are built to last and can handle increased power output, making them a popular choice among enthusiasts. However, they are more expensive than stock rods and may require additional engine work for installation. It is essential to ensure proper installation and maintenance to maximize the benefits and avoid potential engine damage.
Recommendation:If you are looking to significantly upgrade the performance of your VW Corrado 2.9 VR6 engine, the Maxpeedingrods NP4OJM H-Beam 4340 Forged Connecting Rods are a solid choice. However, be prepared for the added cost and potential additional engine work. If you are new to engine building or maintenance, it is recommended to seek the help of a professional to ensure proper installation and to fully understand the potential risks and benefits.
Big end bores tolerance: /-.01mm. Overall: Increased horsepower and efficiency Specifically engineered for demanding race applications Strength high while keeping lightweight in Mind. It begins from the date purchased. Magnetic particle inspection: Dimensional and menfolks inspected to ensure extreme reliability.
Weight tolerance: Sets are weight matched to /- 1g. Material: Forged 4340 aircraft chrome moly quality steel. Heat treatment: treated to increase tensile strength. Connecting rod handle type:beam design greatly increases strength and durability.
Torque 26ft 35NM. Connecting rod bushing: Bronze wrist pin bushings are fitted to each increased wear resistance. Appearance: Provide non-logo products, also provide private customized logo. Custom-make is available.
Oil hole: Pin oiling for long wrist pin life. CNC processing: Machined and the bores honed to exact same tolerances. Shot preening: All rods are Preening, micro-polished to improve fatigue life.