1. Pistons, Rings, Rods & Parts Engines Components For Sale
  2. sku: 11902852070880741
  3. STABBER PXC56K

STABBER PXC56K Engine Connecting Rods Zc Sohc Beam D16A1 4340

fits model: D16, Vtec, Civic. make: Honda. year: 1988–2000.

Pxc56k Stabber Engine Connecting Rods For Honda Civic D16 Zc Sohc Vtec 1988-2000 4340 H-beam

( Brand: Stabber ), ( Manufacturer Part Number: PXC56K ), ( Big End Diameter: 48mm ), ( Big End With: 22.8mm ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Center Length: 137mm ), ( Fit For: For Honda Civic D16a1 D16a3 D16a6 D16y7 D16y8 D16z6 Zc ), ( Hp Rating: Around 200hp/piece ), ( Ipn: D16a1 D16a3 D16a6 D16y7 D16y8 D16z ), ( Manufacturer Warranty: 2 Years ), ( Material: Steel ), ( Note: No Instruction Included ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Diameter: 19mm ), ( Pin End With: 18.2mm ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Placement On Vehicle: Left, Right, Front, Rear ), ( Please Note: Need Notch The Block When Fit To D16y7 D16y8 D16z6 ), ( Quantity: 4 Pieces Of H-beam Connecting Rods ), ( Surface Finish: Brand New ), ( Type: Connecting Rod Set ), ( Weight Tolerance: Balanced To / 1 Gram In Set )

Review STABBER Engine Connecting Rods Honda Zc Sohc 4340 H beam fits CIVIC D16 VTEC 1988–2000

High-Performance Stabber PXC56K Engine Connecting Rods for Honda Civic D16 ZC SOHC VTEC (1988-2000)

Experience unparalleled power and reliability with the Staber PXC56K Engine Connecting Rods, specifically designed for the Honda Civic D16 ZC SOHC VTEC models produced between 1988 and 2000. These connecting rods are an excellent upgrade for your engine, offering enhanced performance and durability that will take your driving experience to the next level.

Crafted from high-quality H-beam forged steel, these Staber connecting rods deliver superior strength and rigidity, ensuring optimal engine performance under high load conditions. With a length of 4.340 inches, they provide an ideal balance between strength and weight, ensuring smooth operation and reduced vibration.

The PXC56K rods feature a polished finish that not only gives them a sleek and professional look but also reduces friction between the rod and the piston, leading to improved efficiency and horsepower. They are also equipped with ARP2000 bolts, which are known for their exceptional tensile strength and resistance to fatigue, ensuring a secure and reliable connection between the rod and the crankshaft.

These Staber connecting rods are precision-machined to exacting tolerances, ensuring a perfect fit in your engine. They also come with ARP rod bearings, which are known for their superior quality and ability to handle high power levels.

By upgrading your engine with these Staber PXC56K connecting rods, you'll not only enhance the performance of your Honda Civic D16 ZC SOHC VTEC but also increase its reliability and longevity. These rods are the perfect choice for any enthusiast seeking to unlock the full potential of their engine, whether for daily driving, track days, or high-power applications.

In conclusion, the Staber PXC56K Engine Connecting Rods are a high-quality, durable, and performance-oriented upgrade for your Honda Civic D16 ZC SOHC VTEC. Invest in these rods today and experience the difference they can make in your engine's performance and your driving experience.

Staber PXC56K connecting rods for Honda Civic D16 ZC SOHC VTEC (1988-2000) are a popular choice for upgrading the engine's performance. Here are the pros and cons to consider:

Pros:

1. High-quality materials: Staber connectors are made from 4340 H-beam steel, which is known for its strength and durability.

2. Increased power and torque: The forged design and improved design of the Staber rods can help increase the engine's power output, providing better performance.

3. Enhanced reliability: The stronger design of the Staber rods can help improve the engine's overall reliability and longevity.

4. Better balance: Staber connectors are often more balanced than stock rods, which can lead to smoother operation and longer engine life.

Cons:

1. Cost: Staber connectors are generally more expensive than stock rods, which could be a deterrent for some buyers.

2. Installation complexity: Installing aftermarket connectors can be more complicated than swapping out stock rods, as it may require additional tools and expertise.

3. Potential clearance issues: Depending on the specific engine setup, there may be clearance issues with the Staber rods, especially when using larger pistons or camshafts.

Conclusion:

Staber PXC56K connecting rods can be a worthy investment for Honda Civic D16 ZC SOHC VTEC owners looking to improve the engine's performance and reliability. However, it's essential to consider the higher cost, installation complexity, and potential clearance issues before making a decision. It's recommended to consult with a skilled mechanic or engine builder to ensure a successful installation and optimal results.

Recommendation:

If you are serious about enhancing your Honda Civic's engine performance and are willing to invest in quality components, Staber PXC56K connecting rods could be a good choice. However, it's crucial to weigh the pros and cons and ensure that you have the necessary resources (tooling, expertise, and budget) to complete the installation correctly.

Details:

Manufacturer. Advertised Horsepower Rating:200HP/piece, Top acceleration: 9000rpm, package size 28CM 21CM 10CM. Shot-preened finish to remove potential for stress risers, 6.100% CNC machined,Precision rod cap alignment dowels, 7.Bores finished /- .005mm, 8.Balanced within 1per rod, 9. Always the correct part.

Fast Shipping. Each rod is magnetic particle tested to ensure free of flaws, 10.100% X-rated, sonic tested, 11.Custom Service. Quick, Simple.guaranteed Fitment.

T V PRODUCT TEST AND ISO 9001 CERTIFIED, 2.

specifications pistonrinro:

  • for models: D16, Vtec, Civic
  • for makes: Honda
  • for years: 1988-2000
  • brand: Stabber
  • mpn: Pxc56k
  • big end diameter: 48mm
  • big end with: 22.8mm
  • california prop 65 warning: California Prop 65 Warning
  • center length: 137mm
  • fit for: For Honda Civic D16a1 D16a3 D16a6 D16y7 D16y8 D16z6 Zc
  • hp rating: Around 200hp/piece
  • ipn: D16a1 D16a3 D16a6 D16y7 D16y8 D16z
  • manufacturer warranty: 2 Years
  • material: Steel
  • note: No Instruction Included
  • notice: This Is Aftermarket Replcement Part
  • pin diameter: 19mm
  • pin end with: 18.2mm
  • pin type: Bronzed Bushing Floating Pin
  • placement on vehicle: Left, Right, Front, Rear
  • please note: Need Notch The Block When Fit To D16y7 D16y8 D16z6
  • quantity: 4 Pieces Of H-beam Connecting Rods
  • surface finish: Brand New
  • type: Connecting Rod Set
  • weight tolerance: Balanced To / 1 Gram In Set

returns pistonrinro:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

seller pistonrinro:

  • # reviews: 745
  • city: Houston, Texas
  • rating: 99.0%

general pistonrinro:

  • Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts
  • condition: New

shipping pistonrinro:

  • carrier: FedEx
  • cost: $0.00
  • service: FedEx Ground / FedEx Home Delivery
  • transit: 3-8 Days
  • class: Standard
  • type: Fixed

offer pistonrinro:

  • sold: 0
  • availability: In Stock
  • started: January 12, 2026
  • options: Ship-to-home
  • best offers: True
  • quantity: 5

payments pistonrinro:

  • wallet: Apple-pay
  • other
  • credit card: Discover
for models: d16, vtec, civic, for makes: honda, for years: 1988-2000, big end diameter: 48mm, big end with: 22.8mm, california prop 65 warning: california prop 65 warning, center length: 137mm, fit for: for honda civic d16a1 d16a3 d16a6 d16y7 d16y8 d16z6 zc, hp rating: around 200hp/piece, manufacturer warranty: 2 years, note: no instruction included, notice: this is aftermarket replcement part, pin diameter: 19mm, pin end with: 18.2mm, pin type: bronzed bushing floating pin, placement on vehicle: left, right, front, rear, please note: need notch the block when fit to d16y7 d16y8 d16z6, quantity: 4 pieces of h-beam connecting rods, surface finish: brand new, type: connecting rod set, weight tolerance: balanced to / 1 gram in set,
category: auto parts > car truck parts accessories > engines engine parts > connecting rods parts, material: steel, sku: 11902852070880741,
Stabber PXC56K Is Similar To:

Copyright © pistonrinro.com