STABBER 05NJTY Racing Connecting Rods Set B18C5 138MM

( Brand: Stabber ), ( Manufacturer Part Number: 05NJTY ), ( Big End Diameter: 48mm ), ( Big End Width: 21.77mm ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Center Length: 138mm 5.430 ), ( Fitment Type: Performance/custom ), ( Manufacturer Warranty: 2 Years ), ( Material: Steel ), ( Notice: This Is Aftermarket Replcement Part ), ( Pin Diameter: 21mm 0.827 ), ( Pin Type: Bronzed Bushing Floating Pin ), ( Small End Width: 23.45mm ), ( Type: Connecting Rods ), ( Universal Fitment: No ), ( Weight Tolerance: Balanced To / 1 Gram In Set )

Review STABBER Racing Connecting Rods Set Acura Type 138mm fits INTEGRA B18C1 1994–2001

The **STABBER 05NJTY Racing Connecting Rods Set** is a high-performance, precision-engineered upgrade designed exclusively for the **Acura Integra (B18C1/B18C5) models from 1994 to 2001**, featuring a **138mm big bore build** for those seeking maximum power and reliability. Crafted from **forged 4340 steel**, these rods are heat-treated to an **ultra-high tensile strength**, ensuring they can withstand the extreme stresses of forced induction, high RPM, and aggressive engine builds without compromising structural integrity. The **fully machined, balanced, and polished** design eliminates any manufacturing inconsistencies, providing a smooth, vibration-free operation that enhances both performance and longevity. Each rod is **carefully matched in weight** to minimize imbalance, reducing harmful harmonics that can lead to premature wear on bearings, crankshafts, and other critical components. The **precision-ground rod journals** and **optimized rod bolt holes** are engineered to accommodate modern high-performance pistons, allowing for improved oil flow and reduced friction, which translates to better efficiency and increased horsepower. Whether you're running a **turbocharged, supercharged, or naturally aspirated** build, these rods are built to handle the demands of modern high-output engines while maintaining the stock crankshaft interface, making them a seamless and cost-effective upgrade. STABBER s reputation for **durability and performance** is backed by rigorous testing, ensuring these rods deliver consistent results under extreme conditions making them an essential component for any serious Integra enthusiast looking to push the limits of their engine without sacrificing reliability.

### Pros and Cons of buying a Stabber 05NJTY Racing Connecting Rods for the Acura Integra (B18C1/B18C5, 1994 2001, 138mm)

1. **High-Quality Materials and Construction** Stabber rods are forged from premium aircraft-grade aluminum alloy, ensuring durability and resistance to fatigue. The precision machining and heat treatment improve strength and reliability, especially under high-stress conditions like forced induction or aggressive driving.

2. **Lightweight Design** The rods are significantly lighter than stock units, reducing reciprocating mass. This lowers inertia, improves engine balance, and can enhance RPM potential, especially in high-revving applications like turbocharged or supercharged setups.

3. **Increased Strength and Safety Margin** The rods are designed to handle higher loads than stock components. This is particularly beneficial if you plan to run boost, nitrous, or aggressive tuning, as they reduce the risk of catastrophic failure.

4. **Compatibility with Stock and Upgraded Engines** These rods are designed specifically for the B18C1/B18C5 platform and fit standard crankshaft journals. They can be used with stock pistons (if properly matched) or upgraded pistons, making them versatile for both stock and modified builds.

5. **Warranty and Support** Stabber is a reputable manufacturer with a solid reputation for customer service and warranties. This provides peace of mind in case of defects or installation issues.

6. **Improved Engine Reliability** By replacing worn or subpar stock rods, you eliminate a common failure point in high-mileage or heavily modified engines. This can extend the lifespan of your engine and prevent unexpected breakdowns.

7. **Enhanced Performance Potential** For naturally aspirated builds, the lighter rods can improve engine response and high-RPM performance. For forced induction applications, they provide the structural integrity needed to handle increased cylinder pressures.

---

1. **Cost** Stabber rods are a premium product and will be significantly more expensive than stock or aftermarket alternatives (e.g., OEM replacement rods or budget brands). The price point may be prohibitive for casual drivers or those on a tight budget.

2. **Installation Complexity** Replacing connecting rods requires disassembling the engine, removing the crankshaft, and carefully installing the new rods with proper alignment and torque specifications. This is a labor-intensive job that may require professional help, adding to the overall cost.

3. **Piston Matching Requirements** While Stabber rods are compatible with stock pistons, using mismatched pistons (e.g., incorrect weight, material, or compression height) can lead to issues like rod bolt stretch, piston slap, or reduced efficiency. This may require additional upgrades to the piston set.

4. **Limited Stock Availability** Depending on your location, finding a reputable seller for Stabber rods may be challenging. Some online marketplaces or specialty shops may carry them, but availability can be inconsistent compared to more common aftermarket parts.

5. **Potential Overkill for Stock or Mild Builds** If your engine is stock or only mildly modified (e.g., mild tuning without forced induction), the benefits of Stabber rods may not be immediately noticeable. For such applications, a more budget-friendly rod set (e.g., OEM replacements or mid-tier aftermarket rods) might suffice.

6. **Crankshaft Considerations** While Stabber rods are designed for standard B18C crankshafts, extremely high-power applications (e.g., extreme forced induction) may require a reinforced or balanced crankshaft to fully utilize the rods' potential. This could add further cost.

7. **Learning Curve for DIY Installation** If you re not experienced with engine rebuilds, the process of installing connecting rods especially with proper lubrication, alignment, and torqueing can be daunting. Mistakes during installation (e.g., cross-threading rod bolts or improper gap settings) can lead to catastrophic failure.

---

The Stabber 05NJTY connecting rods are an excellent choice for Acura Integra owners who prioritize **long-term reliability, high-performance potential, and premium build quality**. They are ideal for:

- **Forced induction builds** (turbocharged or supercharged engines) where increased strength and reduced reciprocating mass are critical.

- **High-RPM or aggressive driving applications** where stock rods may be a weak point.

- **Engines with high mileage or prior damage** where replacement with a proven, high-quality rod set is justified.

- **Builds aiming for durability and longevity**, even if performance gains are modest.

However, they may not be necessary for **stock or mildly modified engines** where budget constraints or simplicity are priorities. In such cases, a more affordable rod set (e.g., OEM replacements or aftermarket alternatives like JE or ARP) could provide adequate performance without the premium cost.

---

- You re running or planning forced induction (boost >10 psi).

- Your engine has high mileage or a history of issues (e.g., previous rod failure).

- You re building a high-revving, performance-focused engine and want the best possible components.

- You re willing to invest in long-term reliability and are prepared for the installation labor.

- Your build is stock or only mildly modified (e.g., mild tuning without forced induction).

- You re on a tight budget and can find a high-quality, budget-friendly rod set (e.g., ARP 1000 series, JE rods, or OEM replacements).

- You re not comfortable with the complexity of engine disassembly or rod installation.

For most **forced induction or high-performance B18C builds**, the Stabber rods are a **strong recommendation** due to their proven track record and ability to handle extreme stress. However, weigh the cost against your specific goals to ensure they align with your project s needs.

Details:

Manufacturer. Racing Connecting Rods Set for Acura Integra Type R B18C1 B18C5 94-01 138mm. Specification, V PRODUCT TEST AND ISO 9001 CERTIFIED, Type: Forged 4340 aircraft chrome Molly quality steel for racing, I-beam Conrad's Quantity: 4 Pieces a set, Bolts: Including 3/8 ARP 2000 bolts, Note: Extra cost upgrading to L19 Bolts Size: 3/8, Tolerance: Balanced /- 1 gram in Piston Bolt Hole: -4/1000mm, Power: 600hp 800PS per Strength of the fastening PSI: 220,000/230,000 PSI Torque: 48ft 65 NM, Top acceleration: 9000rpm, warranty: 2 years warranty any manufacture defect. Dimensions, to length : 5.433 138mm, Big end diameter: 48mm, Small 21mm, width : 21.77mm, 23.45mm.

Shot-preened finish to remove potential for stress risers, 6.High precision CNC machined,Precision rod cap alignment dowels, 7.Bores finished /- .005mm, 8.Balanced within 1per rod, 9. Always the correct part. Quick, Simple. Fast Shipping.

G guaranteed Fitment.

part #: 05njty prices

• $270.99-$399.00

specifications pistonrinro:

• for models: B18c1, Integra
• for makes: Acura
• for years: 1994-2001
• brand: Stabber
• mpn: 05njty
• big end diameter: 48mm
• big end width: 21.77mm
• california prop 65 warning: California Prop 65 Warning
• center length: 138mm 5.430
• fitment type: Performance/custom
• manufacturer warranty: 2 Years
• material: Steel
• notice: This Is Aftermarket Replcement Part
• pin diameter: 21mm 0.827
• pin type: Bronzed Bushing Floating Pin
• small end width: 23.45mm
• type: Connecting Rods
• universal fitment: No
• weight tolerance: Balanced To / 1 Gram In Set

payments pistonrinro:

• other
• wallet: Apple-pay
• credit card: Mastercard

general pistonrinro:

• condition: New
• Car Truck Parts Accessories > Engines Engine Parts > Connecting Rods Parts

returns pistonrinro:

• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

shipping pistonrinro:

• type: Fixed
• service: FedEx Ground / FedEx Home Delivery
• transit: 2-6 Days
• class: Standard
• cost: $0.00
• carrier: FedEx

seller pistonrinro:

• rating: 99.2%
• city: Houston, Texas
• # reviews: 798

offer pistonrinro:

• quantity: 1
• sold: 0
• options: Ship-to-home
• best offers: True
• availability: In Stock
• started: February 26, 2026

Stabber 05NJTY Is Similar To:

• Stabber 83iodb Forged Connecting Rods Conrods For Bmw Mini Cooper B58 3.0t Dohc 5.827 Inch (41.1% similar) Our mechanic will inspect every return item. Shot-preened finish to remove potential for stress risers, 6.HIGH precision CBC machined,precision rod cap alignment dowels, 7.BORES finished /- .005MM, 8.BALANCED within 1PER rod, for shipping damage case. Item quality problem. Each rod is magnetic ...(May 7th, 2025)
• Stabber 95gkaq Forged 4340 Connecting Rods Conrods 2014-present For Bmw Mini Cooper S F56 B48 (48.1% similar) Forged 4340 connecting rods Conrad's 2014 -PRESENT for BMW mini coopers F56 B48. Our mechanic will inspect every return item. Item quality problem. The reason for return. Shot-preened finish to remove potential for stress risers, 6.HIGH precision CBC machined,precision rod cap alignment dowels, 7....(May 7th, 2025)
• Stabber Vxkg1a I-beam Connecting Rods Conrod For Subaru Legacy Ej20 Ej22 Ej25 Engine 130.5mm (50.5% similar) Return item must be in brand new and unused condition with original tags packaging. For Subaru impress Rx sit EJ20 EJ22 EJ25 engine, legacy forester 2.0L turbo EJ205 engine 2002 - 2005 , sit EJ207 1998 -PRESENT, 2.5L EJ255 2006 -2014, EJ257 2004 -2016, Saab 9-2X 2005 - 2006 , Isuzu Asoka 1990...(May 7th, 2025)
• Stabber 0njcge I-beam Connecting Rods Conrods For Honda Acura B18c1 B18c5 Gsr Integra R 94-01 (63.4% similar) Return items must be in original condition. For shipping damage case. Dimensions, to length : 5.433 138MM, big end diameter: 48MM, small 21MM, width : 21.77MM, 23.45MM. I-beam connecting rods Conrad's for Honda acura B18C1 B18C5 GSR integra r 94-01. The reason for return. Specification, v product ...(May 8th, 2025)
• Stabber Df21wo I-beam Connecting Rods Conrod For Subaru Legacy Ej20 Ej22 Ej25 Engine 130.5mm (51.6% similar) Shot-preened finish to remove potential for stress risers, 6.HIGH precision CBC machined,precision rod cap alignment dowels, 7.BORES finished /- .005MM, 8.BALANCED within 1PER rod, return items must be in original condition. Advertised horsepower RATING:200HP/PIECE, top acceleration: 9000RPM, ...(September 4th, 2025)
• Stabber Fh1m8i Forged 4340 Connecting Rods Conrods 2014-present For Bmw Mini Cooper S F56 B48 (48.1% similar) Advertised horsepower RATING:200HP/PIECE, top acceleration: 9000RPM, package size 28CM 21CM 10CM. For shipping damage case. Our mechanic will inspect every return item. Return items must be in original condition. The reason for return. Shot-preened finish to remove potential for stress risers, 6....(September 4th, 2025)
• Stabber 8l72e4 Forged Connecting Rods Conrods For Bmw Mini Cooper B58 3.0t Dohc 5.827 Inch (41.1% similar) Return items must be in original condition. Item quality problem. Each rod is magnetic particle tested to ensure free of flaws, 10.USE x-rated, sonic tested, 11.CUSTOM service. Shot-preened finish to remove potential for stress risers, 6.HIGH precision CBC machined,precision rod cap alignment dowels...(September 4th, 2025)
• Stabber Oz9c7w I-beam Forged Connecting Rods Conrods For Honda K20 K20a2 K20z1 K20z3 5.472 Inch (40% similar) Advertised horsepower RATING:200HP/PIECE, top acceleration: 9000RPM, package size 28CM 21CM 10CM. Return item must be in brand new and unused condition with original tags packaging. Application, for Honda K20 K20A2 K20Z1 K20Z3, note: not K20A3, civic 2.0L 06-11,K20Z3, acura Rx 05-06,K20Z1, 02-04,...(September 6th, 2025)
• Stabber V8cqz6 I-beam Connecting Rods For Acura Honda Tsx Crv K24 K24a2 K24a4 K24z 5.984 Inch (49.2% similar) The reason for return. V product test and ISO 9001 certified, return items must be in original condition. Shot-preened finish to remove potential for stress risers, 6.HIGH precision CBC machined,precision rod cap alignment dowels, 7.BORES finished /- .005MM, 8.BALANCED within 1PER rod, return item ...(September 6th, 2025)
• Stabber Ob2d7g I-beam Forged Connecting Rods Conrods For Mazda Speed 3 Mzr 2.3l Disi 0.886 Inch (38.9% similar) The reason for return. For shipping damage case. Return items must be in original condition. Our mechanic will inspect every return item. I-beam forged connecting rods Conrad's for Mazda speed 3 Mr 2.3L Dis 0.886. Return item must be in brand new and unused condition with original tags packaging. ...(September 6th, 2025)
• Stabber Y4kvlj 4pcs Forged 4340 I-beam Connecting Rods For Honda S2000 F20c Conrods 153mm (45.8% similar) 4PCS forged 4340 i-beam connecting rods for Honda S 2000 F20C Conrad's 153MM. Return item must be in brand new and unused condition with original tags packaging. To length : 153MM, big end diameter: 51MM, small 23MM, width : 23.8MM, 23.8MM. Return items must be in original condition. Our mechanic...(September 6th, 2025)